SSR-90-B-R11-KG300 Luminus Devices, SSR-90-B-R11-KG300 Datasheet - Page 8

• Manufacturer Part Number: SSR-90-B-R11-KG300
• Description: LED High Power (> 0.5 Watts) Blue 450-470nm 200lm @ 3.15A
• Manufacturer: Luminus Devices

Specifications of SSR-90-B-R11-KG300

• Illumination Color: Blue
• Wavelength/color Temperature: 464 nm
• Viewing Angle: 100 deg
• Operating Voltage: 3.6 V
• Operating Current: 6.3 A
• Minimum Operating Temperature: - 40 C
• Maximum Operating Temperature: + 85 C
• Led Size: 8 mm
• Lens Shape: Dome
• Package / Case: 19 mm x 19 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Optical and Electrical Characteristics
Common Characteristics
Emitting Area
Emitting Area Dimensions
Dynamic Resistance
Thermal Coefficient of Photometric Flux
Thermal Coefficient of Radiometric Flux
Thermal Coefficient of Junction Voltage
Absolute Maximum Ratings
Maximum Current
Maximum Junction Temperature
Storage Temperature Range
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
Note 8:
Note 9:
Note 10: Caution must be taken not to stare at the light emitted from these LEDs. Under special circumstances, the high intensity could damage
All ratings are based on test conditions of Tj=25C, 20 millisecond pulse. See Thermal Resistance section for Tj definition.
Listed drive conditions are typical for common applications. PhlatLight SST-90 red, green and blue devices can be driven at currents
ranging from <1 A to 6.3 A and at duty cycles ranging from 1% to 100%. Drive current and duty cycle should be adjusted as necessary to
maintain the junction temperature desired to meet application lifetime requirements.
Unless otherwise noted, values listed are typical. Devices are production tested and specified at 0.35 A/mm
erence only.
Total flux from emitting area at listed dominant wavelength. Reported performance is included to show trends for a selected power
level. For specific minimum and maximum values, use bin tables. For product roadmap and future performance of devices, contact
Luminus.
In CIE 1931 chromaticity diagram coordinates, normalized to X+Y+Z=1.
For reference only.
Luminus PhlatLight LEDs are designed for operation to an absolute maximum current as specified above. Product lifetime data is spec-
ified at recommended forward drive currents. Sustained operation at or beyond absolute maximum currents will result in a reduction
of device lifetime compared to recommended forward drive currents. Actual device lifetimes will also depend on junction tempera-
ture. Refer to the lifetime derating curves for further information. In pulsed operation, rise time from 10-90% of forward current
should be larger than 0.5 microseconds.
Lifetime dependent on LED junction temperature. Input power and thermal system must be properly managed to ensure lifetime. See
charts on pg 11 for further information.
Special design considerations must be observed for operation under 1 A. Please contact Luminus for further information.
the eye.
7
SST-90
8
Product Datasheet
1
Symbol
Symbol
T
Ω
jmax
dyn
www.luminus.com
-40/+100
-0.96
-0.52
3 x 3
Red
Red
0.03
-1.3
125
9.0
6.3
-40/+100
Green
Green
-0.18
-0.20
3 x 3
0.04
-4.6
150
9.0
9
© 2009 Luminus Devices, Inc. - All Rights Reserved
-40/+100
-0.007
-0.17
Blue
Blue
3 x 3
0.07
-3.5
150
9.0
9
2
. Other values are for ref-
mm
mV/ºC
Unit
mm
%/ºC
%/ºC
Unit
ºC
ºC
Ω
A
x
mm
2
PRELIMINARY
Page 8