DB-DIP8-LPC901 FDI, DB-DIP8-LPC901 Datasheet - Page 2

• Manufacturer Part Number: DB-DIP8-LPC901
• Description: Interface Modules & Development Tools DB-DIP8-LPC901 w/ LPC901 loaded Rev 1
• Manufacturer: FDI

Specifications of DB-DIP8-LPC901

• Operating Supply Voltage: 3.3 V
• Product: Interface Modules
• For Use With/related Products: P89LPC901
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Headers – The
footprint for easy probing of signals or to support prototyping or wire-wrapping. Consult the
schematic if there are any questions about pin alignment from the microcontroller to the headers.
Power – The USB-Dongle provides the regulated 3.3V power required by the DB-DIP8-LPC901. The DB has a
power measurement jumper, JP1, to allow the user to easily measure the power consumption of the microcontroller.
In the artwork, JP1 pin 1 is shorted to pin 2 so the board is continuously powered. The board can be easily modified
by cutting JP1 and loading a standard 0.10” header.
LED - A green activity or status LED is provided at location D1 on the Derivative Board. This LED can be used to
indicate when the microcontroller is being programmed or for other types of user activity under software control.
Crystal or Clock Frequency - The
frequency of 7.373 MHz so no external crystal is needed on the DB.
Rev 2 8/14/2008
Technical Details
edge finger connector to interface to
Ordering Information
The
Board Dimensions 1.218” x 0.7”
DB-DIP8-LPC901
the USB-Dongle.
DB-DIP8-LPC901
Availability: Stock
www.mouser.com
All brand names and product names are trademarks or registered trademarks of their respective holders.
Order Online at:
uses a PCB
Example of USB-Dongle and Derivative Board
USB-Dongle
brings every pin of the microcontroller out to a standard 0.10” spacing header
DB-DIP8-LPC901
The USB-Dongle includes a 14 pin connector to the Derivative Board
Switched Power (3V for ICP) or
Reset (High True for 8051 ISP)
that utilizes the following signals. Not all signals are used on all
PCL/SCL (ICP/I2C)
TXD (UART)
SCLK (SPI)
MSIO (SPI)
is clocked by the on-board oscillator in the LPC901 at a
ISP/ICPn
Ground
DB-HVSON10-LPC9103
Target Interface
Derivative Boards:
E-mail:
[phone] Phone
[phone] FAX
FDI Contact Info:
www.teamfdi.com
[e-mail]
5V (USB power, unswitched)
(for ICP & LPC2000 ARM)
PSEN/P0.14 (ISP entry)
PDA/SDA (ICP/I2C)
Reset (Low True)
3V (unswitched)
RXD (UART)
DB-DIP8-LPC901
MOSI (SPI)