RDB1768V2-EDU Code Red Technologies, RDB1768V2-EDU Datasheet - Page 6

• Manufacturer Part Number: RDB1768V2-EDU
• Description: MCU, MPU & DSP Development Tools RDB1768V2 DEV BRD W/ ON BRD DEBUG FOR EDU
• Manufacturer: Code Red Technologies

Specifications of RDB1768V2-EDU

• Processor To Be Evaluated: LPC1700
• Data Bus Width: 32 bit
• Interface Type: RS-232, Ethernet, USB, I2C, JTAG, SPI
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

LED 2-5
MicroSD
Display
RST
ISP
ETH
TP2
Line-in
Mic-in
S2
Headphone
Line-out
Debug
JTAG/SWD
PSU
TP1
LED6
LED7
UH1, UH2
Speaker
Joystick
ADC Pot
NAME
Copyright Code Red Technologies Inc. 2009
JTAG/SWD connector
User LEDS connected to P1_24, P1_25, P1_28, P1_29
Micro-SD Card socket. Pins connect to SSI0/SPI on the LPC1768
128x128 pixel color LCD display
Reset button for processor
ISP button. Hold down with RST, then release RST first to enter
ISP mode
The Ethernet connector
Scope probe GND post
Stereo 3.5mm connector line level input connector to the audio
codec
Sensitive mic input to the audio codec
Dual DIP switch to select the source of audio to the speaker.
Either the Codec, the DAC or a mix of both.
Stereo 3.5mm connector for driving audio headphones
Stereo 3.5mm line-level output from the audio codec
USB Mini-B connector for use of ‘on-board’ debug – direct connect
to PC for debug with Red Suite. Can be used to power the board.
Standard 0.05” pitch 2x5 pin JTAG/SWD connector for use of
external debug probe such as Red Probe
External power supply connector – 5V D.C. regulated
Scope probe GND post
The power-on LED
USB device ‘Goodlink’ LED
User Headers with all IO pins
Speaker driven from either on-chip DAC, or audio codec. Source is
selected by S2.
4-way + select, switch style joystick
Potentiometer connected to Analogue to Digital Convertor (ADC)
of LPC1768
DESCRIPTION
Page 6 of 18