II-EVB-600-3-220 Connect One, II-EVB-600-3-220 Datasheet - Page 37

• Manufacturer Part Number: II-EVB-600-3-220
• Description: MCU, MPU & DSP Development Tools iChip CO2464SEC EVAL BOARD 220V
• Manufacturer: Connect One

Specifications of II-EVB-600-3-220

• Processor To Be Evaluated: CO2064SEC
• Interface Type: RS-232, Ethernet
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

II-EVB-600 User Manual
3.2.1
The parameters stored in the II-EVB-600 can be saved to a Remote Parameter File (RPF) or
loaded from an RPF file onto the II-EVB-600.
To save the current configuration to an RPF file:
3.2.2
To load an RPF file onto the iChip:
Miscellaneous Operational Features
1. Click the Full Configuration icon. The II-EVB-600 Full Configuration window is
2. Click File > Save as RPF File in the Full Configuration window. The RPF Parameters
3. Configure the following parameters and click OK:




1. Select File > Load RPF file from the iChipConfig menu. The Open dialog box is
displayed.
dialog box is displayed:
Select the Start from factory defaults check box if you want to save the factory
default settings as your new parameters.
Do not select the Start from factory defaults check box if you want to save your
current configuration (except for parameters) in the RPF file.
Group - Not relevant
Destination Chip Serial Number - Not relevant
displayed:
Saving the II-EVB-600 Configuration to an RPF File
Loading an RPF File
Firmware and Parameters Update
32