WM9711LGEFL/V Wolfson Microelectronics, WM9711LGEFL/V Datasheet - Page 28

no-image

WM9711LGEFL/V

Manufacturer Part Number
WM9711LGEFL/V
Description
Audio CODECs Stereo AC'97 CODEC with H/P
Manufacturer
Wolfson Microelectronics
Datasheet

Specifications of WM9711LGEFL/V

Number Of Adc Inputs
1
Number Of Dac Outputs
1
Interface Type
AC97
Resolution
12 bit
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Package / Case
QFN EP
Minimum Operating Temperature
- 25 C
Number Of Channels
2 ADC/2 DAC
Audio Codec Type
Stereo
No. Of Adcs
2
No. Of Dacs
3
No. Of Input Channels
9
No. Of Output Channels
4
Adc / Dac Resolution
12bit
Adcs / Dacs Signal To Noise Ratio
94dB
Sampling Rate
48kHz
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
WM9711LGEFL/V
Manufacturer:
FAIRCHILD
Quantity:
1 251
WM9711L
w
ANALOGUE AUDIO OUTPUTS
HEADPHONE OUTPUTS – HPOUTL AND HPOUTR
The following sections give an overview of the analogue audio output pins. For more information on
recommended external components, please refer to the “Applications Information” section.
The HPOUTL and HPOUTR (pins 39 and 41) are designed to drive a 16Ω or 32Ω headphone or a
line output. They can also be used as line-out pins. The output signal is produced by the headphone
mixer.
The signal volume on HPOUTL and HPOUTR can be independently adjusted under software control
by writing to register 04h. When HPOUTL and HPOUTR are not used, the output drivers can be
disabled to save power (see “Power Management” section). Both pins remain at the same DC level
(the reference voltage VREF) when they are disabled, so that no click noise is produced.
Table 15 HPOUTL / HPOUTR Control
04h
HPOUTL /
HPOUTR
Volume
REGISTER
ADDRESS
15
13:8
7
5:0
BIT
MUTE
HPOUTLVOL
ZC
HPOUTRVOL
LABEL
1
000000
(0dB)
0
00000
(0dB)
DEFAULT
Mute HPOUTL and HPOUTR
1: Mute (OFF)
0: No Mute (ON)
HPOUTL Volume
000000: 0dB (maximum)
000001: -1.5dB
… (1.5dB steps)
011111: -46.5dB
1xxxxx: -46.5dB
Zero Cross Enable
0: Change gain immediately
1: Change gain only on zero crossings,
or after time-out
HPOUTR Volume
Similar to HPOUTLVOL
DESCRIPTION
PD Rev 4.3 August 2006
Production Data
28

Related parts for WM9711LGEFL/V