AP-SAFD18BQA016GS-EL Apacer, AP-SAFD18BQA016GS-EL Datasheet - Page 23

• Manufacturer Part Number: AP-SAFD18BQA016GS-EL
• Description: Memory Modules SAFD 181 16GB
• Manufacturer: Apacer

Specifications of AP-SAFD18BQA016GS-EL

• Product: 1.8 in Solid State Drive
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Memory Size: 16 GB
• Memory Type: SATA Flash Drive
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SMART ENABLE OPERATIONS
Enables the SMART function. This setting is maintained when the power is turned off and then back on. Once
the SMART function is enabled, subsequent SMART ENABLE OPERATIONS commands do not affect any
parameter.
SMART DISABLE OPERATIONS
Disables the SMART function. Upon receiving the command, the drive disables all SMART operations. This
setting is maintained when the power is turned off and then back on.
Once this command has been received, all SMART commands other than SMART ENABLE OPERATIONS
are aborted with the Aborted Command error.
This command disables all SMART capabilities including any and all timer and event count functions related
exclusively to this feature. After command acceptance, this controller will disable all SMART operations.
SMART data is no longer be monitored or saved. The state of SMART is preserved across power cycles.
SMART RETUREN STATUS
Reports the drive reliability status.
SMART ENABLE/DISABLE AUTOMATIC OFF-LINE
Enables (when Sector Count register = “F8h”) or disables (Sector Count register = “00h”) the automatic off-line
data collection function.
The automatic collection is disabled if a value of “00h” is set in the Sector Count register before a
subcommand is issued. If automatic collection is disabled, the drive can still save attribute information during
normal operation, such as during the power-on/off sequence or error correction sequence.
The automatic collection function is enabled if a value of “F8h” is set in the Sector Count register before the
command is issued. Values other than “00h” and “F8h” are vendor-specific.
2.1.24 Standby (E2h)
This command causes the device to set BSY, enter the Sleep mode (which corresponds to the ATA “Standby”
Mode), clear BSY and return the interrupt immediately.
2.1.25 Standby Immediate (E0h)
This command causes the device to set BSY, enter the Sleep mode (which corresponds to the ATA “Standby”
Mode), clear BSY and return the interrupt immediately.
© 2009 Apacer Technology Inc.
Values reported when a predicted defect has not been detected:
Values reported when a predicted defect has been detected:
Cylinder Low register: 4Fh
Cylinder High register: C2h
Cylinder Low register: F4h
Cylinder High register: 2Ch
AP-SAFD18BQAxxxxS-XXEL
Serial ATA Flash Drive
22
Rev. 1.3