NXFT15XH103FA2B050 Murata, NXFT15XH103FA2B050 Datasheet - Page 23

• Manufacturer Part Number: NXFT15XH103FA2B050
• Description: Thermistors - NTC 10Kohm +/-1% 3380K 50mm length
• Manufacturer: Murata
• Series: NXFr
• Type: NTCr

Specifications of NXFT15XH103FA2B050

• Resistance: 10 KOhms
• Tolerance: 1 %
• Termination Style: Wire
• Operating Temperature Range: - 40 C to + 125 C
• Dimensions: 1.2 mm W
• Current Rating: 0.12 mAmp
• Power Rating: 7.5 mW
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
7. Printing Conditions of Solder Paste
8. Adhesive Application and Curing
3
NCP03
NCP15
NCP18/NCP21
The amount of solder is critical. Standard height of fillet is
shown in the table below.
Too much soldering may cause mechanical stress,
resulting in cracking, mechanical and/or electronic
damage.
Thin or insufficient adhesive may result in loose
component contact with land during flow soldering.
Low viscosity adhesive causes chips to slip after
mounting.
Continued from the preceding page.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number
Temp. Sensor and Compensation Chip Type !Caution/Notice
The Solder Paste Thickness
100 m
150 m
200 m
Reference: Optimum Solder Amount
E
Electrode
Solder
0.2mmVTVE
1/3EVTVE
1/3EVTVE
T
T
Solder
R44E.pdf
21
11.2.21
4