NFM18PC104R1C3D Murata, NFM18PC104R1C3D Datasheet - Page 2

• Manufacturer Part Number: NFM18PC104R1C3D
• Description: EMI/RFI Suppressors & Ferrites 0.1UF 16V 2 AMP
• Manufacturer: Murata

Specifications of NFM18PC104R1C3D

• Shielding: Unshielded
• Test Frequency: 1 MHz
• Product: EMI Filters
• Tolerance: 20 %
• Maximum Dc Current: 2 Amps
• Maximum Dc Resistance: 0.03 Ohms
• Operating Temperature Range: - 55 C to + 125 C
• Package / Case: 0603 (1608 metric)
• Termination Style: SMD/SMT
• Filter Type: EMI
• Current Rating: 2A
• Capacitance: 100nF
• Svhc: No SVHC (15-Dec-2010)
• Termination Type: SMD
• Capacitance Tolerance +: +20%
• Capacitance Tolerance -: -20%
• Rohs Compliant: Yes
• Voltage Rating Vdc: 16V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

I !Caution/Notice
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
o
!Caution (Rating)
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
This data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Noise Suppression Products/EMI Suppression Filters > Chip EMIFILr Capacitor Type > Chip EMIFILr for Large Current
http://www.murata.com/
Data Sheet
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
2007.5.10
2