PV36W501C01B00 Murata, PV36W501C01B00 Datasheet - Page 18

• Manufacturer Part Number: PV36W501C01B00
• Description: Trimmer Resistors - Multi Turn 500ohms 10mm Square 25turn
• Manufacturer: Murata

Specifications of PV36W501C01B00

• Resistance: 500 Ohms
• Power Rating: 0.5 Watt (1/2 Watt)
• Operating Temperature Range: - 55 C to + 125 C
• Element Type: Cermet
• Product: Multi-Turn Trimmer Potentiometers
• Tolerance: 10 %
• Number Of Turns: 25
• Taper: Linear
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

!Note
!Note
3. Cleaning
1. Use suitable screwdrivers that fit comfortably in
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
(4) In chip placers, the recommended size of the
(1) In case there is flux on the resistive element,
Flow Soldering Standard Profile
Reflow Soldering Standard Profile
Notice (Handling)
driver slot. We recommend the screwdrivers below.
* Recommended screwdriver for manual adjustment
* Recommended screwdriver for automatic
Continued from the preceding page.
trimmer potentiometer from breakage.
cylindrical pick-up nozzle should be outer
dimension 2.5-2.8mm dia. and inner dimension
2mm dia.
<PVZ3/PVA3 series>
<PVZ3/PVA3/PVS3 series>
adjustment
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
VESSEL MFG. : NO.9000+1.7x30
TORAY MFG. : SA-2225
TORAY MFG. : JB-2225
(Murata P/N : KMDR080)
(Murata P/N : KMDR070)
(Murata P/N : KMBT070)
250
200
100
230
200
100
0
0
PVA3/PVS3/PVZ3_A01 Series
Pre-heating (in the air)
Pre-heating (in the air)
PVA3 Series Only
60-120 sec.
60-120 sec.
For reflow soldering
For flow soldering
5 sec. max.
Soldering
(Melting zone)
30 sec. max.
Soldering
Gradual Cooling
Gradual Cooling
(in the air)
(in the air)
Time
Time
3. For PVZ3 and PVA3 series, please use within the
4. When using a lock paint to fix slot position,
(2) Isopropyl-alcohol and Ethyl-alcohol are
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
effective rotational angle.
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
please consult with a Murata factory representative
prior to using to prevent corrosion and contact
intermittence.
clean sufficiently with cleaning solvents and
completely remove all residual flux.
applicable solvents for cleaning. If you use any
other types of solvents, please evaluate
performance by your product.
260
220
180
150
100
PVZ3/PVS3/PVA3 Series Notice
Pre-heating (in the air)
PVZ3_C01/E01 Series
60-120 sec.
For refllow soldering
30-40 sec.
Soldering
R50E13.pdf 04.6.11
Gradual cooling
(in the air)
Time
17
2