PSLP-103 Amphenol, PSLP-103 Datasheet - Page 24

• Manufacturer Part Number: PSLP-103
• Description: Standard Circular Connectors 10.3 Surlok Pin
• Manufacturer: Amphenol
• Series: Amphe-Powerr

Specifications of PSLP-103

• Product Type: Contacts
• Contact Style: Pin (Male)
• Shell Style: Plug
• Number Of Positions / Contacts: 1
• Mounting Style: Screw
• Mating Style: Threaded
• Termination Style: Crimp
• Contact Plating: Silver
• Current Rating: 300 A
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: C10-647178-001

RADSOK
PowerBlok
Traditional methods of adding increased power to existing PCBs are often bulky and/or expensive:
• Add additional boards or increase the thickness of copper layers of the board which is expensive and
• Bring the power with wires either screwed to the board or with pluggable connections. This method can
AMPHENOL HAS BETTER SOLUTIONS -
Amphenol Industrial has three RADSOK
board real estate in a system. Amphenol PowerBlok
with a low profile and mount into thru-holes in the board. The Amphenol PGY
that is a small stand-off component with a RADSOK
RADSOK
RADSOK
traps heat within the board.
create a “rats nest” of wires and take an excessive amount of expensive board real estate.
Close-up of 3.6mm
RadSert installed
into PC Board.
®
®
POWERBLOK
RADSERT
®
TM
PowerBus
TM
, RADSERT
3.6mm RadSert
and inner RADSOK
TM
®
®
The RADSOK
connection to the PCB with the proven reliability of compliant pin
signals. The PowerBlok
board, utilizing our custom 3.0mm RADSOK
pins are press-fit into the board to secure a solid connection and even
flow.
solutions to add power to PCBs and preserve valuable
The RADSERT
most power in a single-point connection to the Printed Circuit
Board. RADSERT
board from busbars suspended above the board and all of the
board components. Pins from the busbar plug into the
RADSOK
the Radserts
holes in the PCB. The Radsert
available in 2.4mm and 3.6mm for board sizes of .250” +/- .25”.
TM
®
TM
which is mounted through holes in the board.
®
and Radsert
®
Connectors
s which are installed by press fitting the RADSOK
PowerBlok
• High power to the board in a small footprint. (1/2”x1/2”)
• 3.0mm RADSOK
• Backplane Power interface with compliant pins for
• Touchproof cover.
• Radial design ensures many points of contact.
• Reduces failure modes, eliminates burn outs.
• No threaded fasteners.
• No special crimp tools required.
• Eliminates possible stress fractures in board.
• Faster through-put
• RoHS compliant.
TM
signals.
. The RADSERTs
TM
design is the best option when you need the
TM
TM
• High Power to the board in a small package.
• Hyperbolic socket design ensures many points
• Solder version or pre-loaded RADSERTs
•
•
•
•
•
•
•
allows the designer to bring power to the
TM
is designed to bring up to 70 Amperes to the
TM
of contact.
installed during board fabrication.
No threaded fasteners.
Faster through-put
RoHS Compliant
2.4mm RADSERT
3.6mm RADSERT
No special crimp tools required.
Eliminates possible stress fractures in board.
provides a high current single-point
interconnects are small and
®
TM
TM
carries up to 70AMPS.
TM
has the smallest footprint and is
is an interconnect
are press fit into plate-thru
®
TM
TM
design. The compliant
carries up to 35AMPS.
carries up to 70AMPS.
®
TM
into
are
21