G6Z-1F-A-DC24 Omron, G6Z-1F-A-DC24 Datasheet - Page 15

• Manufacturer Part Number: G6Z-1F-A-DC24
• Description: Low Signal Relays - PCB NL 24VDC 50 Ohm Y terminal 2.6GHz
• Manufacturer: Omron
• Series: G6Zr

Specifications of G6Z-1F-A-DC24

• Contact Form: 1 Form C
• Coil Voltage: 24 VDC
• Coil Current: 8.3 mA
• Coil Type: Non-Latching
• Power Consumption: 200 mW
• Termination Style: Solder Terminal
• Isolation: 60 dB to 65 dB at 900 MHz / 30 dB to 45 dB at 2.6 GHz
• Insertion Loss: 0.1 dB to 0.2 dB at 900 MHz / 0.3 dB to 0.5 dB at 2.6 GHz
• Maximum Switching Current: 0.5 A
• Contact Rating: 30 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Claw Securing Force During Automatic Mounting
During automatic insertion of Relays, be sure to set the securing
force of each claw to the following so that the Relay’s characteristics
will be maintained.
Latching Relay Mounting
Make sure that the vibration or shock that is generated from other
devices, such as Relays, on the same panel or substrate and
imposed on the Latching Relay does not exceed the rated value, oth-
erwise the set/reset status of the Latching Relay may be changed.
The Latching Relay is reset before shipping. If excessive vibration or
shock is imposed, however, the Latching Relay may be set acciden-
tally. Be sure to apply a reset signal before use.
Coating
Do not use silicone coating to coat the Relay when it is mounted to
the PCB. Do not wash the PCB after the Relay is mounted using
detergent containing silicone. Otherwise, the detergent may remain
on the surface of the Relay.
Secure the claws to the shaded area.
Do not attach them to the center area
or to only part of the Relay.
B
Direction A: 4.90 N max.
Direction B: 4.90 N max.
Direction C: 4.90 N max.
High-frequency Relay
G6Z
355