NOVEC FLUX REMOVER 12 OZ 3M, NOVEC FLUX REMOVER 12 OZ Datasheet - Page 6

• Manufacturer Part Number: NOVEC FLUX REMOVER 12 OZ
• Description: Chemicals Flux Remover 12 oz
• Manufacturer: 3M

Specifications of NOVEC FLUX REMOVER 12 OZ

• Product: Flux Removers
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 5113571697

Hazardous Decomposition: Perfluorinated Acid Fluorides
Hydrogen Fluoride has an ACGIH Threshold Limit Value of 3 parts per million (as fluoride) as a Ceiling Limit and an OSHA PEL of
3 ppm of fluoride as an eight hour Time_Weighted Average and 6 ppm of fluoride as a Short Term Exposure Limit. The odor
threshold for HF is 0.04 ppm, providing good warning properties for exposure.
Decomposition of this product at temperatures above 300 degrees C can form perfluoroisobutylene (PFIB), but PFIB will only
accumulate with continuous exposure to excessive heat in a sealed vessel. The formation rate for PFIB is about 1000 times less than
the rate for primary thermal decomposition products such as HF. During normal use conditions, no health hazard is associated with
the use of this material due to PFIB exposure.
Component-Based Toxicology Information:
For a mixture of ethyl nonafluorobutyl ether and its isomer, a single positive response for cardiac sensitization was observed at an
exposure level of 49,000 ppm. No adverse health effects are anticipated from normal handling and use.
ECOTOXICOLOGICAL INFORMATION
Available upon request
CHEMICAL FATE INFORMATION
Available upon request
Waste Disposal Method: Combustion products will include HF and HCl. Facility must be capable of handling halogenated materials.
Dispose of waste product in a facility permitted to accept chemical waste. Facility must be capable of handling aerosol cans. Dispose
of empty product containers in a sanitary landfill.
EPA Hazardous Waste Number (RCRA): Not regulated
ID Number(s):
98-0212-3291-7, 98-0212-3328-7, 98-0212-3339-4, 98-0212-3461-6
_________________________________________________________________________________________________
MATERIAL SAFETY DATA SHEET 3M™Novec™ Flux Remover
SECTION 12: ECOLOGICAL INFORMATION
SECTION 13: DISPOSAL CONSIDERATIONS
SECTION 14:TRANSPORT INFORMATION
SECTION 11: TOXICOLOGICAL INFORMATION
Since regulations vary, consult applicable regulations or authorities before disposal.
Substance
Carbon monoxide
Carbon dioxide
Hydrogen Chloride
Hydrogen Fluoride
Perfluoroisobutylene (PFIB)
Condition
heat
heat
heat
During Combustion
During Combustion
At Elevated Temperatures - extreme conditions of
At Elevated Temperatures - extreme conditions of
At Elevated Temperatures - extreme conditions of
05/02/11
Page 6 of 9