2106-12S Techspray, 2106-12S Datasheet - Page 5

• Manufacturer Part Number: 2106-12S
• Description: Chemicals FINE-L-KOTE HT 12OZ
• Manufacturer: Techspray
• Type: Conformalr

Specifications of 2106-12S

• Product: Coating Products
• Size: 12 oz
• Container: Aerosol
• Chemical Component: Aerosol-Optical Brightener/Aerosol-Tetrafluoroethane/Aerosol-Isobutyl Alcohol/Bulk-High Temperature Silicone Polymer/Polymethylphenyl Silicone Resin/Toluene/Xylene
• Dielectric Constant: 3.1
• Dielectric Strength: 2086
• Dispensing Method: Aerosol
• Primary Type: Coating
• Temperature, Rating: -40 to +350 °C
• Time, Curve: 24 hr
• Time, Setting: 45 min.
• Viscosity: 10 to 30 cps
• Volume Resistivity: 4 x 13^13 Dray
• Weight: 12 Oz.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5. FIRE FIGHTING MEASURES
6. ACCIDENTAL RELEASE MEASURES
7. HANDLING AND STORAGE
Fine-L-Kote HT
INHALATION: Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained
personnel. Seek immediate medical attention.
FLASHPOINT AND METHOD: (40°F)TAG CC
FLAMMABLE LIMITS: Not Established to Not Established
GENERAL HAZARD: Flammable Liquid. Can release vapors that form explosive mixtures at temperatures at or
above the flash point.
EXTINGUISHING MEDIA: Water, foam, dry chemical, carbon dioxide.
HAZARDOUS COMBUSTION PRODUCTS: Smoke, fumes and oxides of carbon.
EXPLOSION HAZARDS: Vapors may form explosive mixture with air.
FIRE FIGHTING PROCEDURES: Use water spray to keep fire-exposed containers cool and to knock down
vapors which may result from product decomposition.
FIRE FIGHTING EQUIPMENT: As in any fire, wear self-contained breathing apparatus pressure-demand,
(MSHA/NIOSH approved or equivalent) and full protective gear.
SMALL SPILL: Dike area to contain spill. Take precautions as necessary to prevent contamination of ground and
surface waters. Recover spilled material on adsorbent, such as sawdust or vermiculite, and sweep into closed
containers for disposal. After all visible traces, including ignitible vapors, have been removed thoroughly wet
vacuum the area. Do not flush to sewer. If area of spill is porous, remove as much contaminated earth and gravel,
etc. as necessary and place in closed containers for disposal.
ENVIRONMENTAL PRECAUTIONS
GENERAL PROCEDURES: Absorb the liquid and scrub the area with detergent and water.
HANDLING: Empty containers will retain product residue and vapor and should be handled as if they were full.
STORAGE: Store in a cool place in original container and protect from sunlight.
STORAGE PRESSURE: Store at local atomspheric pressure.
STORAGE TEMPERATURE: Store in a cool place below ( 120 ) F (49 ) C.
WATER SPILL: NEVER FLUSH TO SEWER.