1570-QT Techspray, 1570-QT Datasheet - Page 2

• Manufacturer Part Number: 1570-QT
• Description: Chemicals ECO-STENCIL SPRAY CL 1 QUART
• Manufacturer: Techspray
• Type: Stencilr

Specifications of 1570-QT

• Description/function: 1 quart (0.95 l) with trigger sprayer
• Product: Cleaners & Degreasers
• Container: Plastic Spray Bottle
• Dispensing Method: Bottle
• Physical State: Liquid
• Primary Type: Cleaner
• Weight: 1 Qt.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Directions
Chemical Components
Chemical Properties (MSDS available on request)
Performance
Tested according to modified MIL-PRF-29608 4.59 standards:
Paste dried for 5 minutes at 212°F (100°C).
Paste is applied to cleaning coupons, sprayed with cleaning fluid, allowed to sit 10-seconds, then a poly-cellulose
wipe (saturated with same cleaning fluid) is dragged across one time using a dowel to maintain consistent pressure.
Percentage refers to the amount of soil (by weight) removed from stainless steel test coupon.
2
Techspray Renew Eco-Stencil Cleaner 1570
99.8% IPA
Techspray Water-Based SMT Cleaner 1692
Manual Stencil Cleaning
•
•
•
•
•
Underside Stencil Cleaning
•
•
Component
2-propanol-1-butoxy ........................................................................................ 5131-66-8
Alcohols, C6-C12, ethoxylated propoxylated ................................................... 68937-66-6
Includes other hazardous components in non-reportable quantities.
•
•
•
•
•
•
•
•
•
•
•
•
Spray and saturate area to be cleaned.
Wipe gently at first to allow cleaning agent to break down paste or adhesive.
Continue to wipe in a circular motion until remaining residues are fully removed.
Replace wipe as it becomes overly saturated with the paste/adhesive or tattered.
Dispose of soiled wipe appropriately depending on the type of paste/adhesive removed.
Fill cleaner into designated reservoir of SMT printer.
Keep adequate liquid level.
EXPOSURE LIMIT: Limits on components not established.
PHYSICAL STATE: Liquid
ODOR: Faint ethereal odor
APPEARANCE: Clear, mobile liquid
pH: 5-6
PERCENT VOLATILE: 97% at 104°C
VAPOR PRESSURE: < 0.01 mmHg@20°C (VOC Composite Vapor Pressure)
BOILING POINT : ~212°F (100°C)
FLASHPOINT AND METHOD (TAG Closed Cup): None to boiling point
205°F (96°C)
Note: does not sustain combustion.
SOLUBILITY IN WATER: Fully miscible
DENSITY: 0.99 at 25°C
VOC (by wt): 2.7%, 26.5 g/l
Manufacturer’s recommendation 1000 ppm.
Lead, No-Clean
Kester FL250D
53%
52%
26%
Lead, Water-sol
Kester HM531
not tested
89%
53%
For Commercial Use Only
Lead-Free, No-Clean
CAS#
Kester EM907
not tested
Copyright 2009 Techspray.
34%
40%