SI3011-F-FS Silicon Laboratories Inc, SI3011-F-FS Datasheet - Page 67

• Manufacturer Part Number: SI3011-F-FS
• Description: IC VOICE DAA GCI/PCM/SPI 16SOIC
• Manufacturer: Silicon Laboratories Inc

Specifications of SI3011-F-FS

• Includes: Line Voltage Monitor, Loop Current Monitor, Overload Detection, Parallel Handset Detection, Polarity Reversal Detection, TIP and
• Function: Data Access Arrangement (DAA)
• Interface: PCM, Serial, SPI
• Number Of Circuits: 1
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Supply: 8.5mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 16-SOIC (0.154", 3.90mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Bit
1
0
Name
TGDI
POLI
TIP Ground Detect Interrupt.
This bit is reverse logic as compared to the TGD bit.
0 = The CO has not grounded TIP causing current to flow.
1 = The CO has grounded TIP, causing current to flow. Once set, this bit must be written to 0
to clear it. If the TDGM bit (Register 3) and INTE bit (Register 3) are set, a hardware interrupt
occurs on the AOUT/INT pin. To clear the interrupt, write this bit to 0.
Polarity Reversal Detect Interrupt (Si3011 and Si3019 line-side only).
0 = Bit 7 of the LVS register has not changed states.
1 = Bit 7 of the LVS register has transitioned from 0 to 1, or from 1 to 0, indicating the polarity
of TIP and RING is switched. If the POLM bit (Register 3) and INTE bit (Register 2) are set, a
hardware interrupt occurs on the AOUT/INT pin. To clear the interrupt, write this bit to 0.
Rev. 1.5
Function
Si3050 + Si3011/18/19
67