3310H-003-103L Bourns Inc., 3310H-003-103L Datasheet - Page 2

• Manufacturer Part Number: 3310H-003-103L
• Description: POT 10K OHM 9MM SQ PLASTIC
• Manufacturer: Bourns Inc.
• Series: 3310r

Specifications of 3310H-003-103L

• Resistance (ohms): 10K
• Power (watts): 0.25W, 1/4W
• Tolerance: ±20%
• Temperature Coefficient: ±1000ppm/°C
• Number Of Turns: Single
• Rotation: 300°
• Adjustment Type: Top Adjustment
• Resistive Material: Conductive Plastic
• Termination Style: Through Hole
• Actuator Length: 12.70mm
• Actuator Type: Slotted Shaft
• Actuator Diameter: 3.18mm
• Package / Case: Square - 0.383" L x 0.375" W x 0.235" H (9.75mm x 9.53mm x 5.97mm)
• Resistance: 10 KOhms
• Power Rating: 0.25 Watt (1/4 Watt)
• Taper: Linear
• Element Type: Conductive Plastic
• Shaft Type: Slotted
• Shaft Length: 12.7 mm
• Shaft Diameter: 3.18 mm
• Track Resistance: 10kohm
• Track Taper: Linear
• No. Of Turns: 1
• Resistance Tolerance: ± 20%
• Potentiometer Mounting: Panel
• No. Of Gangs: 2
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Additional Features
■
■
Popular values listed in boldface. Consult
factory for special resistances.
Standard Resistance Table
Audio taper versions available as special order
RoHS compliant versions available*
Resistance
3310 - 9 mm Square Sealed Panel Control
1,000,000
(Ohms)
100,000
200,000
500,000
10,000
20,000
50,000
1,000
2,000
5,000
Resistance
Code
102
202
502
103
203
503
104
204
504
105
Model Number Designator
Terminal Style Designator
Shaft End Designator
Shaft Length Designator
Bushing Designator
Resistance Code
RoHS Identifi er
How To Order
3310 = 9 mm Panel Control
Single Cup:
C = In-line Straight Terminals Side Exit 2.54 mm centers
R = In-line Terminals Rear Exit 2.54 mm centers
P = 5.08 mm x 2.54 mm Triangular Pattern Rear Exit
Y = 5.08 mm x 5.08 mm Triangular Pattern Rear Exit
Dual Cup (Pot/Pot or Pot/Switch):
H = Dual In-line Straight Terminals Rear Exit 2.54 mm centers
0 = Shaft End Slotted
1 = Shaft End Flatted
0 = 12.7 mm FMS Long Plastic Shaft (Available w/bushing only)
1 = 19.05 mm FMS Long Plastic Shaft (Available w/bushing only)
2 = 5.59 mm FMS Long Plastic Shaft (Bushingless version only)
Pot (or Pot/Pot):
1 = 6.35 mm x 6.35 mm Plastic
2 = 6.35 mm x 6.35 mm Ni Plated Brass
5 = Bushingless (Board Level Control)
Pot/Switch Bushing Designator (use with “H” terminal style only.)
3 = 6.35 mm x 6.35 mm Plastic
4 = 6.35 mm x 6.35 mm Ni Plated Brass
6 = Bushingless (Board Level)
(1st 2 digits are signifi cant, 3rd digit is number of 0s to follow)
L = Compliant
Blank = Non-Compliant
Customers should verify actual device performance in their specifi c applications.
Specifi cations are subject to change without notice.
3310 Y - 0 0 1 - 103 L