HT55BB562KN Kemet, HT55BB562KN Datasheet - Page 14

• Manufacturer Part Number: HT55BB562KN
• Description: Multilayer Ceramic Capacitors (MLCC) - Leaded HT55 5600pF 50volts X7R 10%
• Manufacturer: Kemet
• Series: HTr

Specifications of HT55BB562KN

• Voltage Rating: 50 Volts
• Termination Style: Radial
• Operating Temperature Range: - 55 C to + 200 C
• Product: High Temperature MLCCs
• Dimensions: 5.08 mm W x 5.08 mm L x 2.54 mm H
• Capacitance: 5600 pF
• Tolerance: 10 %
• Temperature Coefficient: X7R
• Lead Spacing: 5.08 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PRODUCT FAMILY
TEMP. CHARACTERISTIC
LEAD CONFIGURATION
STYLE
VOLTAGE RATING
14
Parts should be soldered using a heat sink between the soldering point and the part using a soldering iron rated between 18-
30 watts. Soldering temperature should not exceed +300°C. For wave soldering, the parts should be slowly heated to +150°C
and, after soldering, be allowed to cool down slowly to +90°C to preclude thermal shocking of the parts.
C0G (NP0) capacitors which exhibit little change in capa-
citance with variations in temperature, are used in RF
oscillators, precision timing circuits, wave filters and
other circuits requiring a predictable linear temperature
coefficient.
C0G
S = Standard Axial and
C = C0G (NP0)
R = X7R (BX)
A = Axial
Case Size
R = Radial
See data sheet for detail dimensions
B = 50vdc
D = 100vdc
F = 200vdc
S = Special
Radial Capacitors
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
S
PART NUMBER AND ORDERING INFORMATION
C
R
Manufacturer’s ID
05
Axial and Radial Ceramic Cased Capacitors (C3)
Capacitance
B 103
Date Code
INSTALLATION:
MARKING
Voltage
High Temperature Standard (+125°C)
K
BX and X7R capacitors are used in coupling circuits (IF and
RF); for bypassing and decoupling in computers and stereo
sytems; power supply line filtering and frequency discrimina-
tion.
X7R
SCR/SRR/SCA/SRA Series
G S
KEC
106J
50V
123
TEST LEVEL
LEAD MATERIALS
CAPACITANCE CODE
CAPACITANCE TOLERANCES
S = KEMET standard screening
A = MIL-PRF-20, Group A Test (COG)
A = MIL-PRF-39014, Group A Test (X7R)
X = Special
G = Gold plated copper clad steel
W = Solder coated copper
3 Digit code system expressed in
picofarads (pF)
103 = 10,000pF
151 = 150pF
6R8 = 6.8pF
J = ±5%
K = ±10%
M = ±20%
Other tolerances available upon request
Note: Solderability testing is not required
for gold leaded parts.
clad steel