GRM1555C1H1R0CZ01D Murata, GRM1555C1H1R0CZ01D Datasheet - Page 120

• Manufacturer Part Number: GRM1555C1H1R0CZ01D
• Description: Multilayer Ceramic Capacitors (MLCC) - SMD/SMT 0402 1.0pF 50volts C0G +/-0.25pF
• Manufacturer: Murata
• Series: GRMr

Specifications of GRM1555C1H1R0CZ01D

• Voltage Rating: 50 Volts
• Operating Temperature Range: - 55 C to + 125 C
• Temperature Coefficient / Code: C0G (NP0)
• Product: General Type MLCCs
• Dimensions: 0.5 mm W x 1 mm L x 0.5 mm H
• Termination Style: SMD/SMT
• Capacitance: 1 pF
• Tolerance: 0.25 pF
• Package / Case: 0402 (1005 metric)
• Dielectric Characteristic: C0G / NP0
• Capacitance Tolerance: +80, -20%
• Capacitor Case Style: 0402
• No. Of Pins: 2
• Capacitor Mounting: SMD
• Rohs Compliant: Yes
• Dc: 06+
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
!Note
118
No.
13
14 Durability
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding and wire bonding when tests No. 11 to 14 are performed.
GMA Series Specifications and Test Methods (2)
GMA Series Specifications and Test Methods (2)
Continued from the preceding page.
High
Temperature
High
Humidity
(Steady)
1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
0.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0.
Please check with our sales representatives or product engineers before ordering.
specifications before ordering.
Item
Appearance No defects or abnormalities.
Capacitance
Change
D.F.
I.R.
Appearance No defects or abnormalities.
Capacitance
Change
D.F.
I.R.
Alumina substrate
R6 : Within 12.5%
R6 : 0.2 max.
More than 12.5 · F
R6 : Within 12.5%
R6 : 0.2 max.
More than 25 · F
When no "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (1).
Specifications
Gold land
When "*" is added in PNs table, please refer to GMA Series Specifications and Test Methods (2).
Die bond
Capacitor
Apply the rated voltage for 500 12 hours at 40 2 C, in 90 to
95% humidity and set it for 24 2 hours at room temperature,
then measure. The charge/discharge current is less than
50mA.
• Initial measurement
Perform a heat treatment at 150+0/–10 C for one hour and then
let sit for 24 2 hours at room temperature. Perform the initial
measurement.
• Measurement after test
Perform a heat treatment at 150+0/–10 C for one hour and then
let sit for 24 2 hours at room temperature, then measure.
Apply 150% of the rated voltage for 1000 12 hours at the
maximum operating temperature 3 C. Let sit for 24 2 hours at
room temperature, then measure.
The charge/ discharge current is less than 50mA.
• Initial measurement
Perform a heat treatment at 150+0/–10 C for one hour and then
let sit for 24 2 hours at room temperature. Perform the initial
measurement.
• Measurement after test
Perform a heat treatment at 150+0/–10 C for one hour and then
let sit for 24 2 hours at room temperature, then measure.
Alumina substrate
Gold wire
Test Method
Gold land
C02E.pdf
10.12.20