98.300.1000.0 WIELAND ELECTRIC, 98.300.1000.0 Datasheet - Page 821

• Manufacturer Part Number: 98.300.1000.0
• Description: DIN Mounting Rail
• Manufacturer: WIELAND ELECTRIC
• Series: TS-35mmr

Specifications of 98.300.1000.0

• External Width: 35mm
• Length: 2m
• Body Material: Steel
• Accessory Type: DIN Mounting Rail
• For Use With: DIN Rail Terminal Blocks
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

facts
Degrees of protection according to DIN EN 60 529/ VDE 0470 part 1: 2000 –
09
Connecting devices such as modular terminals, connecting terminals, printed circuit board terminals and plug-in
connectors etc., intended for mounting devices and installation that have no shock-protection housing in the sense of
this standard. No IP protection category can thus be assigned to it. The insulating component is used in the first place
for functional insulation, but can in addition offer protection against direct contact of active components e.g. safety
finger contact and/or touch by the back of the hand. Its surface is not regarded as exposed. The definitive shock
protection is secured by installation measures and by the external protective covering of the end device of the
installation.
Identification examples using the IP code
Explanation of Alpha-numeric IP code system
Identification letter
First identification number
Second identification number
Additional letter
Final letter
A housing using this identification (IP code)
2 – protects people against access to dangerous components (touch-safe)
3 – protects the equipment within the housing against damaging effects of water that is sprayed from
C – protects people who are handling tools with a diameter of 2.5 mm and larger, and a length less than
S – is tested to provide protection against damaging effects of water ingress,
– protects the equipment within the housing against ingress of solid foreign bodies with a diameter of
12.5 mm and larger
every direction against the housing
100 mm, against access to dangerous components (the tool can be inserted into the housing
at full length)
while all components of the equipment are in standstill position
IP
2
3
C
S
819