HR30-6P-6P(71) HRS (HIROSE), HR30-6P-6P(71) Datasheet - Page 11

• Manufacturer Part Number: HR30-6P-6P(71)
• Description: CIR CONN PLUG SIZE 6, 6POS, FREE HANGING
• Manufacturer: HRS (HIROSE)

Specifications of HR30-6P-6P(71)

• Gender: Plug
• Contact Gender: Pin
• Connector Mounting: Free Hanging
• Connector Shell Size: 6
• Insert Arrangement: 6-6
• No. Of Contacts: 6
• Connector Type: Circular Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Note: Loctite is a registered trademark of the Henkel Loctite Corporation.
3
1. To prevent accidental loosening of the back shell it is recommended that a small amount of primer (Loctite® 7649) and
2. Keeping the terminated insulator body on the fixture, re-assembly the plug in order shown.
4. Using the correct back-tightening collar tighten the back shell to the specified torque.
5. Remove the assembly from the fixture.
adhesive (Loctite® 271) be applied to the threads of the insulator body before proceeding.
When tightening the collar make sure that the cable will NOT turn.
Connector
10 and 12 Pos.
3 and 6 Pos.
Back shell tightening collar size
16 mm
18 mm
Torque
11