PIC12C671-04E/SM Microchip Technology, PIC12C671-04E/SM Datasheet - Page 128

• Manufacturer Part Number: PIC12C671-04E/SM
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,SOP,8PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671-04E/SM

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Size: 1.75KB (1K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• Package: 8SOIJ
• Device Core: PIC
• Family Name: PIC12
• Maximum Speed: 4 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 5
• On-chip Adc: 4-chx8-bit
• Number Of Timers: 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164312 - MODULE SKT FOR PM3 16SOIC309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIP
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PICmicro MID-RANGE MCU FAMILY
8.2.2
DS31008A-page 8-6
PIE Register(s)
Depending on the number of peripheral interrupt sources, there may be multiple Peripheral Inter-
rupt Enable registers (PIE1, PIE2). These registers contain the individual enable bits for the
Peripheral interrupts. These registers will be generically referred to as PIE. If the device has a
PIE register, The PEIE bit must be set to enable any of these peripheral interrupts.
Although, the PIE register bits have a general bit location with each register, future devices may
not have consistent placement. Bit location inconsistencies will not be a problem if you use the
supplied Microchip Include files for the symbolic use of these bits. This will allow the Assem-
bler/Compiler to automatically take care of the placement of these bits by specifying the correct
register and bit name.
Note:
Bit PEIE (INTCON<6>) must be set to enable any of the peripheral interrupts.
1997 Microchip Technology Inc.