HE2AN-Q-AC24V PANASONIC EW, HE2AN-Q-AC24V Datasheet - Page 9

• Manufacturer Part Number: HE2AN-Q-AC24V
• Description: Power Relay
• Manufacturer: PANASONIC EW

Specifications of HE2AN-Q-AC24V

• Relay Type: Power
• Coil Voltage Vac Nom: 24V
• Coil Resistance: 300ohm
• Contact Configuration: DPST-NO
• Coil Current: 74mA
• Relay Mounting: Panel
• Relay Terminals: Quick Connect
• Contact Voltage Ac Max: 277V
• Contact Current Max: 25A
• Contact Voltage Ac Nom: 277V
• Contact Voltage Dc Nom: 30V
• Coil Type: AC, Monostable
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

HE RELAY ACCESSORIES
MOUNTING METHOD
1. Relay mounting
NOTES
1. Be careful not to drop the relay. It is
made of heat-hardened resin and may
break.
2. Be sure to tighten the screw-down
terminals firmly. Loose terminals may
lead to the generation of heat.
3. When the 1 Form A is used in
situations covered by the Japanese
Electrical Appliance and Material
Control Law, the use of 5.5 mm
cabling and 30 A current is not
allowed. Consequently, the circuit
should be less than 20 A.
2
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
2. Installing to a DIN rail
4. When fixing the terminal socket with
screws, to avoid torque damage and
distortion, apply torque within the
ranges shown below.
M3.5 screws:
0.784 to 0.98 N·m (8 to 10 kgf·cm)
M4 screws:
1.176 to 1.37 N·m (12 to 14 kgf·cm)
Push
3. Removing from a DIN rail
Flat-head screwdriver