K105A-10-006B006-B KG TECHNOLOGIES, K105A-10-006B006-B Datasheet - Page 3

• Manufacturer Part Number: K105A-10-006B006-B
• Description: POWER RELAY SPST-NO 6VDC, 100A, PC BOARD
• Manufacturer: KG TECHNOLOGIES

Specifications of K105A-10-006B006-B

• Relay Type: Latching
• Coil Voltage Vdc Nom: 6V
• Contact Current Max: 100A
• Contact Voltage Ac Nom: 480V
• Contact Voltage Dc Nom: 60V
• Coil Resistance: 16ohm
• Contact Configuration: SPST-NO
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Disclaimer: This data sheet is for reference only. All specifications are subject to change without prior notice. KG Technologies, Inc. cannot predict
every possible application for our relays. While we do our best to make our relays as versatile as possible, we highly recommend contacting our
engineering team if you have any questions. KG Technologies, Inc. is not responsible for malfunctioning relays when operated outside the specified
parameters given in this data sheet.
KG Technologies, Inc. / Phone: [phone] /
C-Style Terminal
Dual Coil Connection
Dimensional Drawings (cont’d)
Application Notes
Method 1: Place a negative connection on T2. Then apply a 50ms positive pulse to T1 to open the contacts or to T3 to close the contacts.
Method 2: Place a negative connection on T1. Then apply a 50ms positive pulse to T3 to close the relay. Reversing Polarity will open the contacts.
Additional Application Notes
1: All relays are shipped in the “Closed” position. It is possible that during transit or final assembly the relay could change its state to the
2: In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the rated voltage. The pulse width should
3: Relays without flex-wire cannot be tin-soldered. Moving or bending the terminals could cause damage to the internal structure of
T1
“Open” position. Therefore, it is recommended that all relays be set to the desired state of the relay via a power supply.
be 5 times the operating time to ensure a proper change of state. DO NOT energize both T1 and T3 at the same time on a Dual Coil or
energize the coil for longer than 1 minute (damage to the coil could incur).
the relay.
T2
T3
K105
Fax: [phone] / Email: [e-mail] / Web: www.kgtechnologies.net
Single Coil Connection
T1
T3
Page 3 of 4