G3VM-353A1 Omron, G3VM-353A1 Datasheet - Page 2

• Manufacturer Part Number: G3VM-353A1
• Description: SSR, MOSFET, 350V, 150mA
• Manufacturer: Omron
• Series: G3VMr

Specifications of G3VM-353A1

• Load Voltage Max: 350VAC
• Load Current: 150mA
• On State Resistance Max: 15ohm
• Contact Configuration: SPST-NC
• Isolation Voltage: 2500Vrms
• Forward Current If: 25mA
• Relay Terminals: Through Hole
• No. Of Pins: 4
• Circuit: SPST-NC (1 Form B)
• Output Type: AC, DC
• On-state Resistance: 25 Ohm
• Voltage - Input: 1.15VDC
• Voltage - Load: 0 ~ 350 V
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Package / Case: 4-DIP (0.300", 7.62mm)
• Control Voltage Range: 1 V to 1.3 V
• Load Voltage Rating: 350 V
• Off State Leakage Current (max): 1 uA
• Load Current Rating: 150 mA
• Contact Form: 1 Form A
• Output Device: MOSFET
• Mounting Style: PCB
• Relay Type: MOSFET Relay
• Turn-on Switching: FET
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: G3VM353A1; Z2445

Precautions
2
Be sure to turn OFF the power when wiring the Relay, otherwise
an electric shock may be received.
Do not touch the charged terminals of the SSR, otherwise an elec-
tric shock may be received.
Do not apply overvoltage or overcurrent to the I/O circuits of the
SSR, otherwise the SSR may malfunction or burn.
Be sure to wire and solder the Relay under the proper soldering
conditions, otherwise the Relay in operation may generate exces-
sive heat and the Relay may burn.
Electrostatic sensitive devices. Keep in original packaging until re-
quired to use. Avoid touching device terminals. Take static han-
dling precautions during processing.
!CAUTION
!CAUTION
!CAUTION
!WARNING
!WARNING
OMRON logo
OMRON logo
MOS FET Relays
DIP (Dual Inline Package)
SOP (Small Outline Package)
SSOP (Shrink Small Outline Package)
OMRON mark
Note: "G3VM" is not printed on the
Appearance Examples
actual product.
211
228
Technical Information
Model name
LOT No.
Model name
LOT No.
Model name
LOT No.
Use the following formula to obtain the LED current limiting resis-
tance value to assure that the relay operates accurately.
Use the following formula to obtain the LED forward voltage value to
assure that the relay releases accurately.
■ Protection from Surge Voltage on the
If any reversed surge voltage is imposed on the input terminals,
insert a diode in parallel to the input terminals as shown in the follow-
ing circuit diagram and do not impose a reversed voltage value of 3 V
or more.
Input Terminals
C-MOS
Transistor
Surge Voltage Protection Circuit Example
10 to 100 kΩ
Typical Relay Driving Circuit Examples
R
V
1
F (OFF)
=
V
= V
CC
5 to 20 mA
− V
CC
− V
OL
− V
OH
F
< 0.8 V
(ON)
Load
Load