A1203LLHLT-T Allegro Microsystems Inc, A1203LLHLT-T Datasheet - Page 13

• Manufacturer Part Number: A1203LLHLT-T
• Description: IC SW CONTINUOUS TIME BIPO SOT23
• Manufacturer: Allegro Microsystems Inc
• Type: Bipolar Latchr

Specifications of A1203LLHLT-T

• Sensing Range: 95G Trip, -95G Release
• Voltage - Supply: 3.8 V ~ 24 V
• Current - Supply: 7.5mA
• Current - Output (max): 25mA
• Output Type: Digital, Open Drain
• Features: Regulated Voltage
• Operating Temperature: -40°C ~ 150°C
• Package / Case: SOT-23W
• Hall Effect Type: Bipolar
• Output Current: 25mA
• Sensor Case Style: SOT23
• No. Of Pins: 3
• Supply Voltage Range: 3.8V To 24V
• Operating Temperature Range: -40°C To +150°C
• Svhc: No SVHC (15-
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 620-1011-2

A1202
and A1203
mit improvements in the per for mance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the
information being relied upon is current.
failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
nor for any in fringe ment of patents or other rights of third parties which may result from its use.
Copyright ©2005-2010, Allegro MicroSystems, Inc.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such de par tures from the detail spec i fi ca tions as may be required to per-
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the
The in for ma tion in clud ed herein is believed to be ac cu rate and reliable. How ev er, Allegro MicroSystems, Inc. assumes no re spon si bil i ty for its use;
15.75 ±0.51
3.02
+0.08
–0.05
2.16
MAX
0.43
0.51
REF
+0.05
–0.07
45°
1
4.09
2
+0.08
–0.05
For the latest version of this document, visit our website:
3
2.04
E
1.27 NOM
A
E
1.44
Package UA, 3-Pin SIP
B
Continuous-Time Bipolar Switch Family
E
Branded
Face
0.79 REF
www.allegromicro.com
C
0.41
45°
1.52 ±0.05
+0.03
–0.06
Mold Ejector
Pin Indent
For Reference Only; not for tooling use (reference DWG-9049)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
C
D
E
A
B
Gate burr area
Active Area Depth, 0.50 mm REF
Branding scale and appearance at supplier discretion
Hall element, not to scale
Dambar removal protrusion (6X)
D
N = Last two digits of device part number
T = Temperature code
Standard Branding Reference View
= Supplier emblem
1
NNT
115 Northeast Cutoff, Box 15036
Allegro MicroSystems, Inc.
Worcester, Massachusetts 01615-0036 [phone]
www.allegromicro.com
13