MA100GG103C GE Sensing, MA100GG103C Datasheet - Page 2

• Manufacturer Part Number: MA100GG103C
• Description: THERMISTOR NTC .080"DIA 10K OHM
• Manufacturer: GE Sensing
• Series: MA100r

Specifications of MA100GG103C

• Resistance In Ohms @ 25°c: 10K
• Operating Temperature: 0°C ~ 50°C
• Lead Length: 23.98" (609.00mm)
• Mounting Type: Free Hanging
• Package / Case: Probe
• Thermistor Type: NTC
• Resistance: 10kohm
• Thermistor Tolerance: ± 0.25°C
• Operating Temperature Range: 0°C To +50°C
• Thermistor Case Style: Radial Lead
• No. Of Pins: 2
• Peak Reflow Compatible (260 C): No
• Resistance At 25 Celsius: 10 KOhms
• Temperature Range: 0 C to + 50 C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Resistance Tolerance: -
• B Value Tolerance: -
• B0/50: -
• B25/50: -
• B25/75: -
• B25/85: -
• B25/100: -
• Power - Max: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 235-1062

Designed for use in catheter assemblies these sensors are available with nominal resistance
values of 2252, 3000, 5000, and 10,000 ohms at 25° C. Close monitoring of manufactur-
ing processes allow us to maintain tight interchangeability tolerances with volume production.
Typical design parameters are represented in Table 1.
NOTE:
Intermittent body temperature measurements are common practice in all phases of patient
care. This assembly is ideally suited for the disposable cover oral and rectal fever thermome-
ters in use today. It features rugged construction with tip sensitive shaft assemblies exhibit-
ing resistance values of 2252, 3000, 5000, and 10,000 ohms at 25° C.
Refer to Table 1 for typical design parameters.
Routine continuous patient temperature monitoring is now feasible by using the convenience
of the patient’s skin site as an indicator of body temperature. The stainless steel housing used
is suitable for both reusable and disposable applications, while maintaining maximum patient
comfort. Nominal resistance values of 2252, 3000, 5000, and 10,000 ohms at 25° C are
available.
Refer to Table 1 for typical design parameters.
TABLE 1
.030"(10K ohm only) and .050" diameters available with kapton sleeve only.
.070" diameter normally supplied with molded plastic tip.
Nominal R Values
Assembly Type
Body Length L
Lead Length A
Standard Wire
Body Material
Diameters D
Wire Gauge
Insulation
Tolerance
Standard
@ 25°C
TYPE MA
.030" .050" .070"
28, 30, 32, 38 AWG
*Medical Grade PVC
*Polyurethane with
Molded Plastic or
Nylon Overcoat
*Heavy Isomid
Kapton Sleeve
See Table
MA100
.080"
3/8"
24"
2252, 3000, 5000, 10,000
Aluminum Tip
Lexan Shaft
See Table
30 AWG
MA200
.156"
3.75"
Teflon
Ohms
2"
Medical Grade PVC
See Table
Stainless
30 AWG
MA300
.375"
Teflon
Steel
N / A
24"