SI-HG63-TK1 BANNER ENGINEERING, SI-HG63-TK1 Datasheet
SI-HG63-TK1
Specifications of SI-HG63-TK1
Related parts for SI-HG63-TK1
SI-HG63-TK1 Summary of contents
Page 1
... Printed in USA Hinge Wing Safety Interlock Switches SI-HG63 Series Safety Interlock Switches Attached to a Load-Bearing Hinge • Safety switch is integrated into a highly robust PBT housing and screwed onto the fine-cast stainless steel hinge. • Safety switching point is repositionable. • Right-hinge, left-hinge, and right-angle hinge models available; switches can also be converted to operate from the opposite side. • ...
Page 2
... ISO 13849-1 (EN954-1). In addition, the user of Banner safety switches has the responsibility to ensure that all local, state, and national laws, rules, codes, and regulations relating to the use of Banner safety switches in any particular application are satisfied. Extreme care is urged that all legal requirements have been met and that all installations and maintenance instructions are followed ...
Page 3
... Ensure that excessive force is not exerted by the weight and swing of the guard, gate, or door. (See specifications on page 6.) Position blank hinges (if used) and the hinge switch(es) on the guard or gate while its fully closed and latched position. Verify that the axis of rotation is identical for all hinges used. ...
Page 4
... If changing the hinge position on the switch (changing from a left hinge to a right, for example), remove the rectangular plug from the switch housing and attach the hinge to that side. Install the hinge onto the switch and rotate 30° ...
Page 5
... Figure 3. Relocating the switch point setting Banner Engineering Corp. • Minneapolis, MN U.S.A. www.bannerengineering.com • Tel: 763.544.3164 Hinge Switches – b. SW8 f. SI-HG63 Series P/N 129465 ...
Page 6
... Verification that the hinge swings freely throughout its total operating range. • Loosening of mounting hardware. • Signs of deterioration or damage. • Signs of tampering or defeat to the switch or to the wiring interface to the machine. A designated person is identified in writing by the employer as being appropriately trained to perform a specified checkout procedure. ...
Page 7
... Operating Conditions Temperature: – 25° to +70° – 13° to +158° F) Weight 0.65 kg (1.43 lb) Application Notes To avoid excessive radial stress in applications containing large doors, the hinge switch should be mounted either in pairs of two conjunction with a blank hinge (see page 8). Certifications Model SI-HG63FQDR 19.5 mm (0.77" ...
Page 8
... SI-HG63A switches, but without the safety switch component Model Description Replacement accessory kit includes: SI-HG63-TK1 2 plugs 1 plastic washer 1 bit 1 screwdriver WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. ...