2D33 Honeywell Sensing and Control, 2D33 Datasheet - Page 8

• Manufacturer Part Number: 2D33
• Description: MICRO SWITCH, 5A, 250V
• Manufacturer: Honeywell Sensing and Control

Specifications of 2D33

• Microswitch Type: Subminiature
• Switch Operation: ON-OFF
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 30V
• Contact Current Max: 5A
• Switch Terminals: Solder
• Contact Voltage Ac Max: 250V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Manual Switches
Pushbutton Switches and Indicators
LEGEND INFORMATION
Honeywell MICRO SWITCH Division pro-
vides legend service on the inserts sup-
plied with three-piece screens only. To
specify your needs, add -L to the catalog
listings (example: 2A81-L) and use Leg-
end Order Sheet (Form FO-62308),
shown on facing page. Reproduce it on
your office copier.
On any one insert, only one size of type is
provided in either black or white. After
legending, the insert is assembled to the
display screen. The type face used is
‘‘Modified Gothic’’.
LAMPS
T-1
from MICRO SWITCH in 28 volt versions.
Use of neon lamps is not recommended.
Light output is approximately 30% of an
incandescent lamp. Also, a neon lamp
will not illuminate blue or green filters or
display screens due to the absence of
these colors from the neon light spec-
trum.
LAMP POLICY
The 28 volt lamps are offered as a conve-
nience to customers. Honeywell MICRO
SWITCH Division does not extend any
warranty as to such lamps, and cannot
guarantee to provide lamps from specific
manufacturers. Any technical or quality
questions regarding such lamps should
be directed to the lamp manufacturer.
COLOR FILTERS FOR PROJECTED
COLOR
Projected color is achieved by using
white buttons and color filters over clear
lamps. When lamps are lighted, white
button takes on color projected by the
filters.
Filters used with type 2C200 and 2F200
housings (no-tool relamping) slip over
lamp sockets in lampholder.
Honeywell MICRO SWITCH Sensing and Control 1-800-537-6945 USA
3
⁄
4
incandescent lamps are available
SCREEN/LEGEND COLORS
The chart below shows recommended
display screen and legend color combi-
nations for optimum legibility.
LAMP ORDER GUIDE
† These are experimental continuous life test results supplied by a lamp manufacturer for reference only.
Wattage should not exceed 2.4 watts (2 lamps) per switch, for continuous illumination.
FILTER ORDER GUIDE
* Has blue tint to compensate for high yellow content of incandescent lamps at low voltages.
Intermittent operation may reduce these figures as much as 50%. Ratings are based on median values of
current and life.
Catalog
Listing
Screen
Yellow
Amber
Green
2E1
White
Color
For Type 2C200 and
Red
2F200 Housings
Filter Style
Flange
Base
Style
Black
Legend Lettering
x
x
x
327
Type
1-815-235-6847 International 1-800-737-3360 Canada
No.
White
2G12
Red
Volts
x
x
x
28
Amps
.040
Rating
Green
2G14
Life in
Hours
1000
Amber
Volts
24.0
26.0
30.0
2G16
Life/Voltage†
Life (Hrs.)
Expected
Series 2
7,500
2,800
White*
400
2G17
99