Y92A-48 Omron, Y92A-48 Datasheet - Page 43

• Manufacturer Part Number: Y92A-48
• Description: DUST COVER
• Manufacturer: Omron

Specifications of Y92A-48

• Rohs Compliant: YES
• Accessory Type: Cover
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: H5CX-A/-L
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With: H7CZ Series Digital Counters
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Y92A48

Dimensions
Note: All units are in millimeters unless otherwise indicated.
■ Dimensions without Flush Mounting Adapter
H5CX-BWSD (Flush Mounting Models)
■ Dimensions with Flush Mounting Adapter
H5CX-BWSD (Provided with Adapter and Waterproof Packing)
■ Accessories (Order Separately)
Note: Order the Flush Mounting Adapter separately if it is lost or dam-
Hard Cover
Y92A-48
Flush Mounting Adapter
(provided with H5CX-BWSD)
Y92F-30
aged.
Note: M3.5 terminal screw (effective length: 6 mm)
58
48x48
48
Soft Cover
Y92A-48F1
Y92S-29 (provided)
Waterproof Packing
(51)
7.5
6
Panel
64
62.5
Y92F-30 (provided)
Flush Mounting Adapter
Note: 1. Depending on the operating environment, the condition of
Note: Use Waterproof Packing to provide a level of water protection
(provided with H5CX-BWSD)
Waterproof Packing
44.8x44.8
Y92S-29
2. The H5CX’s panel surface is water-resistive (conforming to
that complies with NEMA4, UL Type 4X, or IP66 standards. Or-
der the Waterproof Packing separately if it is lost or damaged.
Depending on the operating environment, the Waterproof
Packing may deteriorate, contract, or harden and so regular re-
placement is recommended.
resin products may deteriorate, and may shrink or become
harder. Therefore, it is recommended that resin products
are replaced regularly.
IP66) and so even if drops of water penetrate the gaps be-
tween the keys, there will be no adverse effect on internal
circuits. If, however, there is a possibility of oil being present
on the operator’s hands, use the Soft Cover. The Soft Cover
ensures protection equivalent to IP54F against oil. Do not,
however, use the H5CX in locations where it would come in
direct contact with oil.
Panel Cutouts
Panel cutouts areas
shown below.
(according to DIN43700).
Note 1. The mounting panel thickness
60 min.
A = (51n−5.5)
A = (48n − 2.5)
With Y92A-48F1 attached.
A = {48n−2.5 + (n−1) x 4}
With Y92A-48 attached.
n side by side mounting
2. To allow easier operability, it is
3. It is possible to mount timers side
45
15 min.
should be 1 to 5 mm.
recommended that Adapters are
mounted so that the gap between
sides with hooks is at least 15 mm.
by side, but only in the direction
without the hooks.
+0.6
−0
A
45
+0.6
−0
+1
0
+1
0
60 min.
0
H5CX-B
43