OS-SS3 PANASONIC EW, OS-SS3 Datasheet - Page 15

• Manufacturer Part Number: OS-SS3
• Description: SLIT MASK 0.5X3MM FOR SH-31R/31G/33R
• Manufacturer: PANASONIC EW

Specifications of OS-SS3

• Rohs Compliant: YES

Basic type
Notes: 1) Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +23 °C
Item
Sensing range
Sensing object
Hysteresis
Repeatability (perpendicular to sensing axis)
Supply voltage
Current consumption
Output
Response time
Operation indicator
Stability indicator
Power indicator
Sensitivity adjuster
Automatic interference
prevention function
Emitting element (modulated)
Material
Cable
Cable extension
Weight
SPECIFICATIONS
Short-circuit protection
Protection
Ambient temperature
Ambient humidity
Ambient illuminance
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Peak emission wavelength
2) The sensing range and the sensing object of the retrorefl ective type sensor are specifi ed for the RF-230 refl ector (optional). The sensing range
3) If slit masks (optional) are fi tted, an object of ø0.5 mm
4) Make sure to confi rm detection with an actual sensor before use.
Sensor
represents the actual sensing range of the sensor. The sensing ranges itemized in “A” of the table below may vary depending on the shape of sensing
object. Be sure to check the operation with the actual sensing object.
range: A
Sensing
Net
Gross
NPN output
PNP output
Setting range
of the reflector: B
Type
Sensing
object
<NPN output type>
CX-411A-P-C05
Green LED (lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type)
NPN open-collector transistor
Two units of sensors can be mounted
close together with interference prevention
fi lters. (Sensing range: 5 m
CX-411A-C05
Extension up to total 100 m
(Optional)
Reflector
Light-ON
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 100 mA sink current)
Green LED (lights up when the power is ON) (incorporated on the emitter)
10 to 500 Hz frequency, 1.5 mm
Emitter: 15 mA or less
Receiver: 10 mA or less
-25 to +55 °C
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
680 nm
10 m
Orange LED (lights up when the output is ON)(incorporated on the receiver for thru-beam type)
Red LED
ø12 mm
32.808 ft
Emitter: 20 g approx., Receiver: 20 g approx.
1,000 V AC for one min. between all supply terminals connected together and enclosure
0.027 mil
CX-411B-P-C05
B
Enclosure: PBT (Polybutylene terephthalate), Lens: Acrylic, Indicator cover: Acrylic
A
0.2 mm
500 m/s
CX-411B-C05
-13 to +131 °F
1 V or less (at 16 mA sink current)
ø0.472 in
Dark-ON
16.404
0 to 3 m
0 to 9.843 ft
0.1 to 3 m
0.328 to 9.843 ft
2
328.084 ft
ø0.020 in
2
3-core (thru-beam type emitter: 2-core) cabtyre cable, 0.5 m
acceleration (50 G approx.) in X, Y and Z directions for three times each
CX-491□
ft)
Thru-beam
or more opaque object (Note 3)
50 g approx.
Incandescent light: 3,000 ℓx at the light-receiving face
(No dew condensation or icing allowed), Storage: -30 to +70 °C
0.059 in
12 to 24 V DC ±10 % Ripple P-P 10 % or less
(using round slit mask) can be detected.
is possible with 0.3 mm
CX-412A-P-C05 CX-412B-P-C05 CX-491A-P-C05-Y CX-491B-P-C05-Y
35 to 85 % RH, Storage: 35 to 85 % RH
CX-412A-C05
Light-ON
double amplitude (10 G max.) in X, Y and Z directions for two hours each
0.5 mm
Emitter: 20 mA or less
Receiver: 10 mA or less
Long sensing range
870 nm
15 m
Infrared LED
Incorporated
1 ms or less
IP67 (IEC)
0.020 in
49.213 ft
0.034 mil
<PNP output type>
2
PNP open-collector transistor
, or more, cable (thru-beam type: both emitter and receiver)
CX-412B-C05
or less
• Maximum source current: 100 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 100 mA source current)
Dark-ON
CX-491A-C05-Y CX-491B-C05-Y
translucent or opaque object (Note 2, 4)
ø50 mm
Incorporated (Two units of sensors can
be mounted close together.)
1 V or less (at 16 mA source current)
Light-ON
1.640 ft
With polarizing fi lters
ø1.969 in
3 m
680 nm
Retrorefl ective
13 mA or less
20 g approx.
30 g approx.
long
9.843 ft
Red LED
-22 to +158 °F
+73.4
or more transparent,
0.027 mil
(Note 2)
°F.
Dark-ON
14