XS5G-D423 Omron, XS5G-D423 Datasheet - Page 13

• Manufacturer Part Number: XS5G-D423
• Description: Waterproof Sensor Connector
• Manufacturer: Omron
• Series: SmartClickr

Specifications of XS5G-D423

• Leaded Process Compatible: Yes
• Contact Material: Brass
• Connector Type: Sensor
• Connector Mounting: Free Hanging
• No. Of Contacts: 4
• Contact Termination: Solder
• Gender: Plug
• Product Type: Connectors
• Shell Style: Plug
• Contact Plating: Gold
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Tools
Use the Crimp Tool to crimp a cable core to the XS5U or XS2U
Crimping Pin used with the XS@C or XS@G Crimping Connector.
Extraction Procedure
(1) Disconnecting Components
(2) Extracting Pin Block
Crimp Tool
XY2F-0002
Pin-block Extraction Tool
XY2F-0001
Use this tool to extract a Pin Block from the covers in order to make
wiring changes or corrections after the cover has been mounted to the
pin block for Connector Assemblies (XS@C/XS@G, soldering/
crimping).
• The XY2F-0002 Crimp Tool is DMC's AFM8 (M22520/2-01).
• Mount the XY2F-0003 Locator (sold separately) to the locator
• Disconnect all components on the cap side from the cover.
• Insert the claws of the Tool into the four holes of the cover.
guide of the Crimp Tool with a screw provided with the XY2F-0003
Locator.
Pin block
Cover
Rubber
bushing
Cable
clamp
Claws
Cap
Holes
Locator
XY2F-0003
Precaution for Safe Use
• Make sure that the pin block is outside the Tool.
• Press the Tool so that the guides of the Tool are in close contact.
• The pin block must not be extracted from the same Connector
Then pull the pin block straight.
more than 3 times, otherwise the proper degree of protection of the
pin block or Connector will not be maintained.
XY2F-0003
Locator
Cover
Locator guide
SEL.
NO.
Guide
Guide
1
5
Pin block
Tool in open position
Tool
Selector dial
(Set to 6.)
Cover
Pin block
Extracting
direction
XY2F-0002
XY2F-0003
XY2F-0001
Model
Model
XY2F-0001
Crimp Tool
Tool in closed
position
XS5
13