104000A01F120 DANIEL WOODHEAD, 104000A01F120 Datasheet - Page 2

• Manufacturer Part Number: 104000A01F120
• Description: MINI-CHANGE CORD, 7/8-16 SOC CONTACTS 4POS STR PLUG
• Manufacturer: DANIEL WOODHEAD
• Series: Mini-Changer

Specifications of 104000A01F120

• Wire Size (awg): 16
• Assembly Cable Type: STOOW
• Jacket Color: Yellow
• Connector Type B: Stripped End Lead
• Cable Color: Yellow
• Rohs Compliant: Yes
• Cable Length: 12ft
• Cable Assembly Type: Sensor
• Connector Type A: Straight Circular Plug, 4 Positions, Socket Contacts
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

FS
Typical Styles
Standard Ring Tongue
The ring tongue terminal is the safest and most reliable
style because it cannot be disconnected unless the screw is
completely removed.
The basic Molex barrel, called Krimptite
and features a quality, one-piece design. It is also the most
economical style and has the greatest variety of uses where
special features are not required.
The InsulKrimp
of PVC affixed to the Krimptite barrel or the brazed-seam
VersaKrimp
crimp and the insulation sleeve protects against vibration
damage by preventing wire flex at the crimp point. The
funnel entrance into the barrel eliminates wire strand
Features
•
•
•
Splices
Molex offers standard and special splices for nearly every
type of wiring needed.
Butt Splice
Stripped wires are inserted from each end and “butt” in the
center, then a crimp at each end secures the connection.
Step Down Butt Splice
The perfect solution when two wires need to be inserted in
one end of a splice and a single wire in the other end.
Parallel Splice
Stripped wires lie side-by-side in the splice and are secured
by a single crimp in the middle.
Note: The connectors shown here are only a representation of our product line. For a complete listing of all solderless terminals and connectors,
S-2 MX10
Material: Copper
Available in wire ranges from 24 to 26 AWG to 4/0
All parts available loose piece; some are also available on
mylar tape carrier
please contact Molex Industrial Division at 1-800-800-0449, or at www.molex.com.
™
barrel. It attaches to the wire with one quick
®
version features a rigid insulation sleeve
®
, is noninsulated
“fold back,” increases crimping rates and enhances wire
termination reliability.
When the butted-seam Krimptite barrel is bonded with a
special brazing alloy, it becomes a VersaKrimp barrel. These
brazed-seam barrel terminals will not open under conditions
of stress or wire pull. As versatile as it is tough, it can be
crimped under most adverse conditions by many types of
tooling. The VersaKrimp is ideal for hard-to-crimp solid and
stranded wires.
The NylaKrimp
wire applications. The color-coded barrel is formed by
affixing a permanent, rigid, color-coded nylon insulating
sleeve to the barrel. The insulation has a funnel entrance
AviKrimp Butt Splice
With the extra metal sleeve and nylon insulation, these
splices should be used when heavy vibration is anticipated
and a strong strain relief is needed.
Funnel Entry Butt Splice
With the funnel entry butt splice, the end that will be
crimped by the crimping press is funneled to allow quick
and easy wire insertion.
Window Butt Splice
The unique feature of this splice is the “window” that is
stamped into the copper splice and covered by nylon. The
inspection window guarantees proper wire insertion and
crimp tool alignment. QPL’d to Mil-T-7928/5
AviKrimp
®
barrel was designed specifically for larger
InsulKrimp
NylaKrimp
into the barrel that eliminates wire strand “fold back,”
increases crimping rates and enhances wire termination.
AviKrimp
ultimate in high-performance terminal design and rugged
construction. The Tin-plated Brass sleeve strengthens the
barrel and secures the wire to protect against stress and high
vibration. The color-coded nylon insulating sleeve extends
beyond the metal support sleeve. A funnel ferrule wire
entrance into the barrel prevents wire strand “fold back”
for increased crimping rates and added wire termination
reliability in the standard barrel length.
Multi-Lock
This is an insulation
displacement connector
that allows tap-and-run
connections. Using only
ordinary channel lock
pliers, these color-coded
connectors make quick,
reliable, preinsulated splices without having to strip, twist
or solder.
Nylon Closed End Connector
The nylon closed end connectors are used in a wide variety
of situations to “pigtail” or tie together two or more wires.
Wire Tap
The Wire Tap splices
onto a wire using an
insulation displacement
barb. No special tools
are required, simply
squeeze together with
pliers.
®
terminals with color-coded barrels offer you the
www.molex.com/product/sterm/
Krimptite
VersaKrimp