S18SP6DQ BANNER ENGINEERING, S18SP6DQ Datasheet - Page 23

• Manufacturer Part Number: S18SP6DQ
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Diffuser

Specifications of S18SP6DQ

• Sensing Range: 100mm
• Output Current: 150mA
• Sensor Output: PNP
• Supply Voltage Range Dc: 10V To 30V
• Contact Current Max: 150mA
• Switch Terminals: Quick Connect
• Sensor Housing: Barrel
• Sensor Input: Optical
• Brand/series: S18
• Current, Switching: 150 mA
• Dimensions: 2.33 in. L
• Function: Proximity
• Indicator: LED
• Ip Rating: IP69K
• Material, Cover: Thermoplastic Polyester
• Material, Lens: Acrylic
• Mounting Type: M18 Threaded
• Output: PNP
• Primary Type: Photoelectric
• Range, Measurement: 4 mm
• Response Time: 3 ms ON and OFF
• Sensing Mode: Diffuse
• Standards: UL Listed, CSA Certified, CE Marked, IEC and NEMA Approved
• Technology: Photoelectric
• Temperature, Operating: -20 to +70 °C
• Termination: 4-Wire Connector
• Voltage, Supply: 30 VDC
• Output Type: Transistor
• Sensing Range Max: 100mm
• Lead Free Status / Rohs Status: RoHS Exempt Product

Supply Voltage
Output
Output Response Time
Adjustments
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Design Standards
Certifications
Hookup Diagrams
CSA:
FM:
KEMA:
ETL:
5 to 15V dc (provided by the amplifier to which the sensor is connected)
Constant current output: ≤ 1.2 mA in the “dark” condition and ≤ 2.1 mA in the “light” condition
Opposed mode receiver: 2 milliseconds on/400 microseconds off
All other models: 5 milliseconds on/off (does not include amplifier response)
15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel); located
on rear panel and protected by a clear gasketed acrylic cover
Red LED Alignment Indicator Device (AID) located on rear panel lights when the sensor sees a “light” condition;
pulse rate is proportional to signal strength (the stronger the signal, the faster the pulse rate).
Reinforced thermoplastic polyester housing, totally encapsulated, o-ring sealing, acrylic lenses, and stainless steel screws
Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 6, 12 and 13; IEC IP67
PVC-jacketed 2-conductor 2 m or 9 m cables, or special 4-pin Euro-style quick-disconnect (QD) fitting are available;
QD cables are ordered separately. See page 381.
Temperature: -40° to +70° C
MIAD9 Series sensors comply with the following standards:
DIN 19 234, EN 50 014 Part 1. 1977, EN50 020 Part 7. 1977, Factory Mutual #3610 and 3611, CSA 22.2 #157-92
and 22.2 #213-M1987
SP02 (p. 489)
MINI-BEAM
#LR 41887
#J.I. 5Y3A4.AX
#03ATEX1441X
#553868
®
NAMUR Specifications
Instrinsically Safe, with Entity for
Class I, Groups A-D
Class I, Div. 2, Groups A-D
Intrinsically Safe, with Entity for
Class I, II, III, Div. 1, Groups A-G
Class I, II, III, Div. 2, Groups A-D and G
II IG EEx ia IIC T6
APPROVALS
More information online at
Relative humidity: 90% at 50° C (non-condensing)
MINI-BEAM
bannerengineering.com
®
NAMUR Series
Compact Sensors
87