SM312CV2QD BANNER ENGINEERING, SM312CV2QD Datasheet - Page 8

• Manufacturer Part Number: SM312CV2QD
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Convergentr

Specifications of SM312CV2QD

• Output Current: 150mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Contact Current Max: 150mA
• Switch Terminals: Quick Connect
• Supply Voltage Min: 10VDC
• Output Current Max: 150mA
• Brand/series: Mini-Beam®
• Current, Switching: 150 mA
• Function: Proximity
• Ip Rating: IP67
• Light Immunity: Red
• Light Source: LED
• Mounting Type: Threaded
• Output: NPN/PNP
• Primary Type: Photoelectric
• Range, Measurement: 43 mm
• Sensing Mode: Convergent
• Standards: UL Recognized, CSA Certified, CE Marked
• Technology: Photoelectric
• Temperature, Operating: -20 to +70 °C
• Termination: 4-Wire Connector
• Voltage, Supply: 30 VDC
• Sensor Input: Optical
• Output Type: NPN/PNP, NO/NC
• Supply Voltage Max: 30VDC
• Sensing Range Max: 43mm
• Lead Free Status / Rohs Status: RoHS Exempt Product

MINI-BEAM
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: [phone] • www.bannerengineering.com • E-mail: [e-mail]
sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety Products
catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
!
WARNING . . .
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death.
This product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A
®
Sensors
Not To Be Used for Personnel Protection
SM312CV and SM312CV2