SMA30SELQD BANNER ENGINEERING, SMA30SELQD Datasheet - Page 4

• Manufacturer Part Number: SMA30SELQD
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of SMA30SELQD

• Output Current: 250mA
• Supply Voltage Range Dc: 10V To 30V
• Sensing Range Max: 200m
• Sensor Housing: Cylindrical
• Switch Terminals: Connector
• Sensor Input: Optical

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: [phone] • www.bannerengineering.com • Email: [e-mail]
P/N 03541 rev. D
APG30S
3-pin Mini-Style
4-pin Mini-Style
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A
sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
Model
!
Style
SM30 Series 30 mm Sensors –
Kit includes: a thread-on stainless steel housing, a flat
glass lens, two quad-ring seals, plus 3 round and 3
slotted aperture disks
WARNING . . .
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
SMB30A
SMB30C
SMB30MM
SMB30SC
SM30CC-306
SM30CC-312
MBCC-406
MBCC-412
MBCC-430
Model
• 30 mm, 12-gauge, stainless steel, right-angle bracket with a curved mounting slot for versatile orientation
• Clearance for M6 (1/4") hardware
• 30 mm split clamp bracket
• Black reinforced thermoplastic polyester
• Includes stainless steel mounting hardware
• 30 mm, 12-gauge, stainless steel, right-angle bracket with curved mounting slots for versatile orientation
• Clearance for M6 (1/4") hardware
• 30 mm swivel bracket
• Black reinforced thermoplastic polyester
• Includes stainless steel mounting and swivel locking hardware
Not To Be Used for Personnel Protection
2 m (6.5')
4 m (12')
2 m (6.5')
4 m (12')
9 m (30')
Length
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for
one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of
Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Quick-Disconnect (QD) Cables
Mounting Brackets
Apertures
Connector
Straight
Description
for Especially Demanding Applications
Emitters and
DC receivers
AC receivers
Use with
���������
�����
�����
�����
���� ������
���� ������
Pinout
���������
����
�����