SP100E BANNER ENGINEERING, SP100E Datasheet

Page 1

MICRO-AMP Remote sensors, modulated amplifiers, and logic modules Printed in USA ® System • A versatile system of compact, high-performance remote sensors modulated amplifiers, and logic modules • Remote sensors for opposed, retro, diffuse, convergent, and fixed-field sensing modes, in ...

Page 2

MICRO-AMP The Banner MICRO-AMP ® System is a family of miniature dc modu- lated photoelectric amplifiers and logic modules which offer the same sensing performance as larger, conventional modules. They are the smallest photoelectric control modules ever built, and can ...

Page 3

MICRO-AMP MA3 and MA3P Modulated Amplifiers Banner MICRO-AMP ® modules MA3 and MA3P are modulated amplifiers designed for use with SP100 Series miniature remote sensors. Miniature photoelectric sensors have traditionally been used as non-modulated devices with very limited response. ...

Page 4

... Beam: infrared, 880nm the sensing point. The SP100E and R have a wide beam angle for forgiving line- of-sight alignment. Alignment is easily made exact (and monitored) using the Effective beam: .05 inch (1,3mm diameter) AID™ ...

Page 5

MICRO-AMP MA3-4 and MA3-4P Modulated Amplifiers Banner MICRO-AMP ® module models MA3-4 and MA3-4P are modulated amplifi- ers designed for use with the popular family of Banner high-performance remote sensors. When these modulated remote sensors are used with the ...

Page 6

Sensors for use with MA3-4 and MA3-4P Modulated Amplifiers Sensors are epoxy-encapsulated and optics are hermetically sealed. Cables are 6 -1/2 feet (2m) long. 30-foot (9m) cables available by special order. Models/Dimensions OPPOSED Mode ALL MODELS Range: 8 feet (2,4m) ...

Page 7

Sensors for use with MA3-4 and MA3-4P Modulated Amplifiers Sensors are epoxy-encapsulated. Cables are 6-1/2 feet (2m) long. 30-foot (9m) cables available by special order. Models/Dimensions SP300EL & SP300RL Temp. range: -40 to +100 C Range: 50 feet (15m) Effective ...

Page 8

Sensors for use with MA3-4 and MA3-4P Modulated Amplifiers Sensors are epoxy-encapsulated. Cables are 6-1/2 feet (2m) long. 30-foot (9m) cables available by special order. Models/Dimensions SP300D Range: 12 inches (30cm) both models Temp. range: -40 to +80 C both ...

Page 9

Sensors for use with MA3-4 and MA3-4P Modulated Amplifiers Sensors are epoxy-encapsulated and optics are hermetically sealed. Cables are 6-1/2 feet (2m) long. 30-foot (9m) cables available by special order. Models/Dimensions FIBER OPTIC Mode LR400 & PT400 with FOF-400 fittings ...

Page 10

Sensor Hookup Diagrams for MA3-4 MICRO-AMP Modules Hookup of LR300 and PT300 Hookup of SP320D Accessories for High Performance Modulated Remote Sensors Extension Cable Modulated remote sensors require specially de- signed cable for efficient sensor performance. Extension cable is available ...

Page 11

MICRO-AMP MA4-2 One-Shot Logic Module ® MICRO-AMP module MA4 plug-in one-shot logic module with adjustable pulse length designed as a way to easily add one-shot timing to a MICRO-AMP system which uses an MA3 or ...

Page 12

MICRO-AMP MA4G 4-input Gate Logic Module ® MICRO-AMP module MA4G 30V dc, plug-in, 4-input logic gate module. It offers three selectable logic modes: "AND", "NOR", and "X-NOR" (exclusive "NOR"). In the AND gate mode, the ...

Page 13

MICRO-AMP System MA4L Latch Logic Module MICRO-AMP ® model MA4L offers two latching logic modes. It can be latched and unlatched with low-going signals to its SET and RESET inputs. It also will function as an edge-triggered "D" flip-flop ...

Page 14

MICRO-AMP MA5 Delay Logic Module ® MICRO-AMP model MA5 is a plug-in delay logic module with adjustable delay timing designed as a way to easily add an ON DELAY or an OFF DELAY timer to a MICRO-AMP system ...

Page 15

MICRO-AMP MPC3 Miniature Modulated Amplifier for direct PC-board mounting Model MPC3 is a modulated LED photoelectric amplifier which utilizes custom CMOS integrated circuitry. It contains all the circuitry necessary to modulate nearly any Light- Emitting Diode (LED) and to ...

Page 16

Functional Schematic, MICRO-AMP MPC3 * U.S. Patent #4598198 Hookup Diagram, MICRO-AMP MPC3 Model MPC3-DB Demo Board The MPC3- battery-powered demonstration/testing board which is available to help in evaluating the MPC3 and its sensor(s). The demo board includes a ...

Page 17

MICRO-AMP • Optical design ensures an exact range limit, regardless of the surface reflectivity of the objects to be sensed • Powerful infrared light source and modulated amp- lification provide reliable sensing of objects with low surface reflectivity • Sensor ...

Page 18

Specifications, model SP100FF Crossover Point: .15 to .25 inch (3,8 to 6,4mm), .20 inch (5,1mm) nominal referenced from sensor face Peak Signal Point: .08 to .16 inch (2 to 4mm), .12 inch (3mm) nominal referenced from sensor face Response Speed: ...

Page 19

MICRO-AMP System MPS-15 and MPS-15-230 Power Supplies MPS-15 Series power supplies are designed specifically to supply power for the Banner MICRO-AMP series amplifiers and logic modules. They are constructed on small PC boards that are track-mountable for compatibility with ...

Page 20

... WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products ...