LTBB5 BANNER ENGINEERING, LTBB5 Datasheet

LTBB5

Manufacturer Part Number

LTBB5

Description

Photoelectric Sensor

Manufacturer

BANNER ENGINEERING

Datasheet

1.LTBA5.pdf (4 pages)

Specifications of LTBB5

Output Current

Sensor Output

Relay

Circuitry

SPDT

Mounting Type

Swivel

Switch Terminals

Cable

Sensor Input

Optical

Current Rating

Switch Operation

ON-OFF

Current page: 1 of 4
Download datasheet (59Kb)

Printed in USA

Banner LTB Series Optical Touch Buttons are touch-activated photoelec-

tric switches designed to replace capacitive touch switches and mechani-

cal push buttons. The OPTO-TOUCH's SPDT electromechanical relay

output changes state, alternating between "on" and "off", whenever a finger,

introduced into the "touch area" (yoke) of the switch, interrupts the LTB's

infrared sensing beam.

Banner LTBs are ergonomically designed to eliminate the hand, wrist, and

arm stresses associated with mechanical push buttons. They require abso-

lutely no physical pressure to operate. LED indicators light for "power on"

and "output activated".

LTBs are highly resistant to EMI, RFI, and ambient light interference, and are

constructed from black polysulfone (or red Lexan

ity in industrial environments. The 30-mm threaded base provides easy

mounting, and LTBs are easily retrofitted to existing machines. See the

listings on pages 2 and 3 for available models.

Specifications

Supply Voltage:

model. See listings of available models, pages 2 and 3.

Output Configuration:

relay (one N.O. contact, one N.C. contact).

Output Rating:

Maximum current 7 amps (resistive load), 1 HP max.

Minimum load .05 watts (dc), .05VA (ac).

Mechanical life of relay 50,000,000 operations (min.).

Electrical life of relay 100,000 operations (min.) at full resistive load.

Transient suppression is recommended when switching inductive loads.

Ambient Light Immunity:

EMI/RFI Immunity:

both single and mixed EMI and RFI noise sources.

Operating Temperature Range:

Indicator LEDs: T

"on"; the other lights when the infrared sensing beam is interrupted.

Construction:

Black polysulfone or red Lexan

VALOX

non-metallic enclosure.

external threads and 1/2" NPSM internal threads. The base requires

a 1-3/16" diameter mounting hole (fits most standard automotive-size

"jumbo" legend plates and oiltight pushbutton holes). OPTO-TOUCH

LTBs are rated NEMA 1, 3, 4, 4X, 12, and 13.

LTB Series

OPTO-TOUCH

are used to initiate machines or operations in which false operation of an Optical Touch Button could be dangerous, point-

of-operation guarding devices or related safety controls must be installed and maintained to meet all appropriate OSHA

regulations and ANSI B11 machine safety standards.

NOTE: In addition to the standards and regulations mentioned above, there are numerous regulations and machine safety

standards that apply to specific industries. For assistance in obtaining copies of any of these standards, contact Banner at

the address and or numbers listed at the bottom of page 4.

base. Electronics fully epoxy-encapsulated. Totally sealed,

WARNING.

purpose initiators, and are not safety devices. Like most solid-state devices, they are as equally likely to fail

in the conducting ("on") state as in the non-conducting ("off") state. If

Maximum voltage is 250V ac or 30V dc.

105 to 130V ac or 210 to 250V ac, depending upon

wo indicator LEDs. One lights when power is

The OPTO-TOUCH is highly resistant to

The LTB's threaded base has M30 x 1,5

All models have SPDT electromechanical

120,000 lux (direct sunlight).

upper housing and fiber-reinforced

™

Alternate Action Optical Touch Buttons

Banner OPTO-TOUCH™ LTB Series Optical Touch Buttons are intended as general-

-20 to +50 C (-4 to +122 F).

) and VALOX

for reliabil-

Cable:

5-conductor mini-type cable (p/n 25496), purchased separately. QD

cables are 12 feet long. Models with attached cable (non-QD models)

are supplied with 6 feet of PVC-jacketed, 22 AWG 5-conductor cable.

Environmental Considerations

Prolonged exposure of the OPTO-TOUCH to direct outdoor sunlight

will cause embrittlement of the polysulfone housing. Window glass

effectively filters longer wavelength ultraviolet and provides excel-

lent protection from sunlight. Contact the factory Application Engi-

neering Department regarding outdoor applications. Clean periodi-

cally using a mild soap solution and a soft cloth. Avoid the following

substances, as they will attack polysulfone to varying degrees: esters,

ketones, aromatic hydrocarbons, chlorinated hydrocarbons, and strong

alkaline materials.

Environmental Considerations

Prolonged exposure of the OPTO-TOUCH to hot water and moist

high-temperature environments above 150 F (66 C) should be

avoided.

halogenated hydrocarbons, and strong alkalis should be avoided.

Clean periodically using mild soap solution and a soft cloth.

Quick-disconnect (QD) models require model MBCC-512

Aromatic hydrocarbons (such as xylene and toluene),

LTB Series Alternate Action

Optical Touch Button (QD model shown)

Read all WARNINGs carefully.

OPTO-TOUCH

LR41887-24

E71083

(models with polysulfone housing)

(models with Lexan

Optical Touch Buttons

housing)

P/N 28437G4D

Related parts for LTBB5

LTBB5 Summary of contents

Page 1

OPTO-TOUCH Alternate Action Optical Touch Buttons LTB Series Banner LTB Series Optical Touch Buttons are touch-activated photoelec- tric switches designed to replace capacitive touch switches and mechani- cal push buttons. The OPTO-TOUCH's SPDT electromechanical relay output changes state, alternating ...

Page 2

... LTBB5(L) 240V ac, 6-foot attached cable LTBB5(L)QD 240V ac, 5-pin quick-disconnect base 105 to 130V ac (LTBA5 models) 210 to 250V ac (LTBB5 models) ® *"L" in model suffix indicates Lexan upper housing. See listing, page 3. OPTO-TOUCH LTB Mounting Hole Information The OPTO-TOUCH has a 30 millimeter threaded base which fits directly into a standard mounting hole for an oiltight push button ...

Page 3

... LTBA5QD 28456 • 34950 LTBA5L • LTBA5LQD 35010 • 28457 LTBB5 LTBB5QD 28458 • 34951 LTBB5L LTBB5LQD 35118 Yellow OTC-1-YW, p/n 30978 Green OTC-1-GN, p/n 30979 Red Yellow Green Cover Cover Cover 35119 35127 35135 35120 35128 35136 35121 35129 ...

Page 4

... WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products ...

Related keywords

LTBB5 datasheet
LTBB5 data sheet
LTBB5 pdf datasheet
LTBB5 component
LTBB5 part
LTBB5 distributor
LTBB5 RoHS
LTBB5 datasheet download