MPA1HD PEPPERL & FUCHS, MPA1HD Datasheet

MPA1HD

Manufacturer Part Number

MPA1HD

Description

Switches

Manufacturer

PEPPERL & FUCHS

Datasheet

1.MPA1HD.pdf (2 pages)

Specifications of MPA1HD

Application

For time delay and logic functions

Function

Module, Logic

Logic Type

Multifunction On⁄Off Delay

Technology

Photoelectric

Timing Adjustment

0.15 to 15 Sec.

Lead Free Status / RoHS Status

Lead free / RoHS Compliant

Current page: 1 of 2
Download datasheet (140Kb)

Photoelectric Sensors

520

MULTIFUNCTION TIMER/LOGIC CARD

FOR A COMPLETE CONTROL

• Multifuction Time/logic Card

• Photoelectric Sensor Head

• Reflector (Retro and Polar Scans)

CHOICE OF:

• Plug-in base

• Plug-in Receptacle

• Mini Base

• Relay Base

Plug-in timer/logic cards easily convert any ON/OFF MP Series photoelectric into a multifunction control. Seven DIP

switches located on the timer card provide the user with a choice of seven delay functions including dual delay and

motion detection. In addition, light operated or dark operated sensing can be selected by a switch located on the

photoelectric sensor head.

TIME DELAY OPTIONS

The timer/logic cards can be set up to modify the sensor’s head output signal. For instance, in thru-scan or reflective scan

(L.O. mode), if the logic card is set for OFF delay the sensor does not immediately turn off its output circuit after the

beam goes dark or is blocked. Instead it waits until the beam has been dark for a preset time. If set for ON delay, the

sensor waits for a preset to time to recognize that the beam is complete.

Each timer/logic card has seven DIP switches to select ON delay, OFF delay, or both. The delays range as shown

in the Specifications and Order Guide. The cards also offer totally independent range selection and adjustment for

ON and OFF delays.

ONE SHOT OPTIONS

In addition, the timer/logic card offers four modes of operation: 1-shot, a delayed 1-shot, 1-shot drop, and a delayed

1-shot drop. The cards can be adjusted for both the width of the 1-shot pulse and the length of delay before the

1-shot is fired.

TIMING OPTION SETTINGS

Prior to inserting a multifunction timer card into the photoelectric sensor head, you must properly set DIP switches

located on the card. You must also set the L.O./D.O. switch located in the photoelectric sensor head.

TIMING ADJUSTMENTS

On the top of the MP Series photoelectric sensor head is an access cover. When opened with a small blade screwdriver,

the multi-turn timer adjustment screws, labeled “1” and “2,” are exposed.

Clockwise rotation increases the time range(s). If a single delay option is selected, the other timer adjustment is automatically

set to zero. When the sensor head has been set to the desired timing range(s), snap the access cover shut to provide

proper head sealing.

PEPPERL+FUCHS

Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com

Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com

Multifunction Logic Cards

Model No.

MPA1HD

MPA133HD

MPA155HD

MPA188HD

Description

0.15 to 15 sec. time adjustment

0.001 to 0.1 sec. adjustment

1 to 30 sec. adjustment

0.01 to 1 sec. adjustment

Related parts for MPA1HD

MPA1HD Summary of contents

Page 1

... When the sensor head has been set to the desired timing range(s), snap the access cover shut to provide proper head sealing. 520 PEPPERL+FUCHS Multifunction Logic Cards Model No. MPA1HD MPA133HD MPA155HD MPA188HD Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com ® ...

Page 2

MULTI-FUNCTION TIMER/LOGIC CARD Timing Options Settings DIP switches on the card are labeled 1-7, with OFF position toward the labels. Refer to the timing chart below for DIP switch settings and their results for a retro-reflective or thru-beam setup. Timing/Ajustment ...

Related keywords

MPA1HD datasheet
MPA1HD data sheet
MPA1HD pdf datasheet
MPA1HD component
MPA1HD part
MPA1HD distributor
MPA1HD RoHS
MPA1HD datasheet download