Q45BB6R BANNER ENGINEERING, Q45BB6R Datasheet - Page 7

• Manufacturer Part Number: Q45BB6R
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Opposed Moder

Specifications of Q45BB6R

• Output Current: 250mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Sensor Housing: Rectangular
• Sensor Input: Optical
• Output Type: Transistor
• Sensing Range Max: 60m
• Switch Terminals: Cable
• Brand/series: Q45BB6
• Current, Switching: 150 mA
• Ip Rating: IP67
• Length, Cable: 2 m
• Light Source: LED
• Material, Housing: Thermoplastic Polyester
• Material, Lens: Acrylic
• Mounting Type: Threaded
• Output: NPN/PNP
• Primary Type: Photoelectric
• Range, Measurement: 60 mm
• Response Time: 2 ms (ON),1 ms (OFF)
• Sensing Mode: Opposed
• Standards: UL Listed, CSA Certified, CE Marked
• Technology: Photoelectric
• Temperature, Operating: -40 to +70 °C
• Termination: 4-Wire Cable
• Voltage, Supply: 30 VDC
• Operating Temperature: –40°C to 70°C
• Lead Free Status / Rohs Status: RoHS Exempt Product

Supply Voltage and Current
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Repeatability
Adjustments
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Application Notes
Certifications
Supply Protection Circuitry
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
•
Minneapolis, MN U.S.A.
10 to 30V dc (10% maximum ripple), at less than 50 mA (exclusive of load)
Protected against reverse polarity and transient voltages
Bipolar: one current sourcing (PNP) and one current sinking (NPN) open-collector transistor
250 mA maximum each output up to 50°C, derated to 150 mA at 70°C (derates 5 mA/°C)
Off-state leakage current less than 1 microamp
Output saturation voltage (both outputs) less than 1 volt at 10 mA and less than 2 volts at 250 mA
Protected against false pulse on power-up and continuous overload or short circuit of outputs
Opposed mode: 2 milliseconds ON, 1 millisecond OFF
All other sensing modes: 2 milliseconds ON/OFF
(NOTE: 100 millisecond delay on power-up. Output is non-conducting during this time.)
Opposed mode: 0.25 milliseconds
All other sensing modes: 0.5 milliseconds
Response time and repeatability specifications are independent of signal strength.
Beneath sensor’s transparent cover: Light/Dark Operate select switch and multi-turn Sensitivity control
(allows precise sensitivity setting – turn clockwise to increase gain). Optional logic and logic/display mod-
ules have adjustable timing functions (see page 10).
Indicator LEDs are clearly visible beneath a raised transparent Lexan
Power (green) LED lights whenever 10 to 30V dc power is applied, and flashes to indicate output overload
Signal (red) AID™ System LED lights whenever the sensor sees its modulated light source, and pulses at a
Load (yellow) LED lights whenever the output is energized
Optional 7-element LED signal strength display modules
Molded reinforced thermoplastic polyester housing, o-ring-sealed transparent Lexan
lenses, and stainless steel hardware. Q45s are designed to withstand 1200 psi washdown. The base of
cabled models has a 1/2" NPS integral internal conduit thread.
NEMA 6P, IEC IP67
PVC-jacketed 2 m (6.5') or 9 m (30') cables; or 4-pin Mini-style (“Q” suffix models) or 4-pin Euro-style
(“Q5” suffix models) quick-disconnect (QD) fittings are available. QD cables are ordered separately; see
page 10.
Temperature: -40° to +70°C (-40° to +158°F)
Maximum relative humidity: 90% at 50°C (non-condensing)
Optional output timing modules are available. See page 10 for more information.
Lexan
®
is a registered trademark of General Electric Co.
Q45BB6 Series Specifications
or output short circuit
LISTED
R
rate proportional to the strength of the received light signal
®
dome on top of the sensor.
Q45BB6 Series
®
cover, molded acrylic
page
7