UB200-12GM-I-V1 PEPPERL & FUCHS, UB200-12GM-I-V1 Datasheet - Page 2

• Manufacturer Part Number: UB200-12GM-I-V1
• Description: Ultrasonic Sensor
• Manufacturer: PEPPERL & FUCHS
• Type: Ultrasonicr

Specifications of UB200-12GM-I-V1

• Sensing Range: 15mm To 200mm
• Frequency: 400kHz
• Beam Divergence: 60°
• Operating Temperature Range: -25°C To +70°C
• Response Time: 30ms
• Sensor Input: Ultrasonic
• Supply Voltage Dc, Max: 30V
• Body Style: Cylindrical
• Current, Switching: 4 mA
• Function: Proximity
• Ip Rating: IP65
• Output: 4-20 mA Analog
• Primary Type: Proximity
• Range, Measurement: 200 mm
• Repeatability: ≤0.5 % of full scale
• Technology: Ultrasonic
• Termination: Quick Disconnect
• Voltage, Supply: 30 VDC
• Distance: 20-200 mm
• Housing: M12 × 1
• Sensor Length: 70 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Subject to modifications without notice
Pepperl+Fuchs Group
www.pepperl-fuchs.com
Modes of Operation
Specifications
SUPPLY VOLTAGE
OUTPUT
INPUT - SYNCHRONIZATION
LED(S)
CURRENT CONSUMPTION
REPEATABILITY
HYSTERESIS
RESOLUTION
LINEARITY
STANDARDS
PROTECTION IEC
STANDARD
TARGET
TEMPERATURE
RANGE
HOUSING MATERIAL
TEMPERATURE DRIFT
APPROVALS
ELECTRICAL CONNECTION
LOAD CURRENT (PER OUTPUT)
VOLTAGE DROP
SHORT CIRCUIT AND
OVERLOAD PROTECTED
REVERSE POLARITY PROTECTION
Ultrasonic Sensors
Single Switch Point Output
Window Mode
Setpoint Mode
Sensor
Sensor
WORKING
STORAGE
TRANSDUCER
UB200, UB400
[e-mail]
USA: [phone]
UB120
Boundary (B1)
Window
Boundary
Window
-13 °F to +158 °F (-25 °C to 70 °C)
-40 °F to +185 °F (-40 °C to 85 °C)
foam polyurethane, surround PBT
≤ 1% of set switching distance
≤ 1% of set switching distance
100 mm x 100 mm flat plate
Epoxy resin/silica composite;
10 mm x 10 mm flat plate
Single Switch Point
≤ 1.5% of final value
Target
Target
Nickel-plated brass
EN 60947-5-2
10-30 VDC
≤ 100 mA
≤ 30 mA
≤ 2 VDC
Yes (2)
M12 x 1 (V1)
IP65
Yes
Yes
Boundary (B2)
No
–
–
Window
4-pin
[e-mail]
Germany: [phone]
-13 °F to +158 °F (-25 °C to 70 °C)
-40 °F to +185 °F (-40 °C to 85 °C)
foam polyurethane, surround PBT
Epoxy resin/silica composite;
100 mm x 100 mm flat plate
10 mm x 10 mm flat plate
Analog Output
15-30 VDC (suffix -U)
≤ 1.5% of final value
10-30 VDC (suffix -I)
≤ 0.5% of full scale
Nickel-plated brass
Analog Output
EN 60947-5-2
Rising and Falling Ramp
± 1% max.
Sensor
Sensor
0.17 mm
≤ 30 mA
[e-mail]
Yes (2)
M12 x 1 (V1)
IP65
Yes
Yes
No
–
–
–
Singapore: [phone]
Copyright Pepperl+Fuchs
Boundary 1 (B1)
4-pin
Switch Point and Analog Outputs
Window
Boundary 1 (B1)
Window
Target
Target
Boundary 2 (B2)
Boundary 2 (B2)
Window
Window
295