T30UUNB BANNER ENGINEERING, T30UUNB Datasheet - Page 4

Ultrasonic Sensor

T30UUNB

Manufacturer Part Number
T30UUNB
Description
Ultrasonic Sensor
Manufacturer
BANNER ENGINEERING
Datasheet

Specifications of T30UUNB

Sensing Range Min
300mm
Sensing Range Max
2m
Switching Frequency
128kHz
External Diameter
40mm
Operating Temperature Range
-20°C To +70°C
Peak Reflow Compatible (260 C)
No
Output Type
Transistor
Leaded Process Compatible
No
U-GAGE
To program the sensor remotely or to disable the keypad, the Remote Programming
function may be used. Disabling the keypad prevents anyone on the production floor
from adjusting any of the programming settings. Connect the gray wire of the
sensor to +12 to 24V dc, with a remote programming switch connected between
them. NOTE: The impedance of the remote teach input is 55 kΩ.
Programming is accomplished by following the sequence of input pulses. The
duration of each pulse (corresponding to a push button “click”), and the period
between multiple pulses, are defined as: 0.04 seconds < T < 0.8 seconds.
• 1 pulse:
• 2 pulses:
• 3 pulses:
• 4 pulses:
Figure 2.
NOTE: Hold the Remote line high > 2 seconds (before teaching the second limit) to exit
4
Remote Programming
Analog & Discrete
P/N 57438 Rev. C
PROGRAM mode without saving any changes. The sensor will revert to the last
saved program.
Push Button
Limits Only
Limits Only
Together
Discrete
Lockout
Timing programs for remote TEACH programming
Analog
Programs first discrete limit. Wait > 0.8 sec. Next pulse programs
second discrete limit.
Programs first analog limit. Wait > 0.8 sec. Next pulse programs
second analog limit.
Programs first analog and discrete limit. Wait > 0.8 sec. Next pulse
programs second analog and discrete limit.
Disables (locks out) or enables the keypad for security.
T30 Series with Analog and Discrete Outputs
0.04 sec < T < 0.8 sec
Discrete Limit
T
T
Teach First
T
T
T
T
T
T
T
Analog Limit
Teach First
T
> 0.8 sec
T
T
Teach First Limits
T
> 0.8 sec
T
> 0.8 sec
T
Push Button Lockout
Discrete Limit
Teach Second
Teach Second
Analog Limit
Teach Second Limits
T
T
T
T
Banner Engineering Corp.
www.bannerengineering.com • Tel: 763.544.3164
Minneapolis, MN U.S.A.

Related parts for T30UUNB