PBT46U BANNER ENGINEERING, PBT46U Datasheet - Page 2

• Manufacturer Part Number: PBT46U
• Description: Sensor Cable Assembly
• Manufacturer: BANNER ENGINEERING

Specifications of PBT46U

• Fiber Diameter: 1mm
• Cable Assembly Type: Bifurcated Fiber
• Ferrule Material: Acrylic
• Cable Length: 2m
• Operating Temperature Min: -30°C
• Connector Type: Bifurcated Threaded
• Fiber Type: Plastic
• Cable Type: Bifurcated
• Diameter, Cable: 0.40 in.
• Primary Type: Cable
• Fiber Cable Length: 2000 mm
• Lead Free Status / Rohs Status: RoHS Exempt Product

OMNI-BEAM, MAXI-BEAM, VALU-BEAM, Q45 Series
OMNI-BEAM, MAXI-BEAM,
VALU-BEAM, and Q45 Series
sensors for use with plastic
fiber optic assemblies include
sensors with the letters FP in
their model number suffix.
MINI-BEAM and ECONO-
BEAM sensors for use with
plastic fiber optic assemblies
include sensors with the letters
FP in their model number
suffix.
MINI-BEAM, ECONO-BEAM
D12 Series
D12 Series sensors for use
with plastic fiber optic as-
semblies include sensors with
the letters FP in their model
number suffix.
PC44 Series
PC44 Series sensors for use
with plastic fiber optic as-
semblies include sensors with
the letters FP in their model
number suffix.
Banner Engineering Corp. 9714 Tenth Ave. No., Minneapolis, MN 55441
Fiber Installation Instructions
Install the plastic fiber optic assembly(s)
as follows:
1) Prepare the sensor ends of the fibers
2) Loosen the clamp screw on the sensor
3) Follow steps 1-3 in the drawing, right.
Install the plastic fiber optic
assembly(s) as follows:
1) Prepare the sensor ends of the
2) Loosen the clamp screw on the
3) Follow steps 1-3 in the
Install the plastic fiber optic assembly(s)
as follows:
1) Prepare the sensor ends of the fibers
2) Unlock (slide up) the fiber gripper.
3) Gently insert the prepared plastic fiber
Install the plastic fiber optic assembly(s)
as follows:
1) Prepare the sensor ends of the fibers
2) Raise (liftup) the fiber gripper door.
3) Gently insert the prepared plastic fiber
fibers (see page 1, bottom).
sensor face.
drawing, right.
(see page 1, bottom).
face.
(see page 1, bottom).
sensor ends into the ports as far as they
will go. Slide the fiber gripper down to
lock.
(see page 1, bottom).
sensor ends into the ports as far as they
will go. Lower the fiber gripper to
lock.
Telephone: [phone]
FAX: [phone]