DR-25-3/8-0 Tyco Electronics, DR-25-3/8-0 Datasheet - Page 2

• Manufacturer Part Number: DR-25-3/8-0
• Description: HEATSHRINK, 9.5MM, BLACK, 10M
• Manufacturer: Tyco Electronics
• Series: DR-25r

Specifications of DR-25-3/8-0

• Body Material: Elastomer
• Shrink Ratio: 2
• Internal Diameter: 9.5mm
• I.d. Supplied: 9.5mm
• I.d. Max Recovered: 4.8mm
• Accessory Type: Heatshrink
• Colour: Black
• Total Length - Metric: 10m
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Isocyanates, all (as NCO)
OCCUPATIONAL EXPOSURE LIMITS
PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY
HAND
EYE
5.
EXTINGUISHING MEDIA
FIRE AND EXPLOSION HAZARDS
PROTECTIVE MEASURES
6.
PERSONAL PRECAUTIONS
ENVIRONMENTAL PRECAUTIONS
RECOVERY
7.
STORAGE
VENTILATION
HANDLING
8.
Name
FIRE FIGHTING MEASURES
ACCIDENTAL RELEASE MEASURES (SPILLAGE)
STORAGE AND HANDLING (IN NORMAL USE)
EXPOSURE CONTROLS/PERSONAL PROTECTION (NORMAL USE)
Raychem Safety Data Sheet
Not required under normal circumstances. Use respiratory protective
equipment if ventilation is inadequate to control exposure.
Heat resistant gloves may be required to manipulate hot products after
installation.
Safety glasses/goggles or face shield, depending on the application.
Not applicable to products as supplied. Small amounts of substituted
aromatic isocyanates may be released during installation.
(8-hour TWA)
Water fog, dry powder, carbon dioxide, foam.
Toxic fumes may be evolved in a fire.
Fire fighters should wear self-contained breathing apparatus with full
facepiece and protective clothing.
Not applicable.
Not applicable.
Pick up for re-use or disposal.
Cool, dry warehouse environment. Store in original packaging and away
from direct sunlight.
Use local exhaust ventilation of the workplace. If using gas torches in
confined spaces, ensure an adequate supply of fresh air to avoid oxygen
depletion.
Refer to Raychem product installation instructions.
Avoid overheating the product after shrinkage has occurred. If the
product blisters, chars or shows any other signs of degradation, stop
heating immediately. Avoid inhaling fumes which may be released from
hot plastic.
Wash hands at the end of work and before eating, drinking or smoking.
0.02 mg m
LTEL
-3
0.07 mg m
(15-minute)
STEL
-3
MEL
Type
Reference RAY/3137E
Page 2 of 4
EH40/95
Ref.