ST10S008V4AR1800 JAE Electronics, ST10S008V4AR1800 Datasheet - Page 2

• Manufacturer Part Number: ST10S008V4AR1800
• Description: CONN MICRO SD MEM CARD 10POS
• Manufacturer: JAE Electronics
• Series: ST10r

Specifications of ST10S008V4AR1800

• Card Type: Secure Digital - microSD™ TransFlash
• Number Of Positions: 10 (8 + 2)
• Connector Type: Connector and Ejector
• Insertion, Removal Method: Push In, Push Out
• Ejector Side: Right
• Mounting Type: Surface Mount, Right Angle
• Features: Switch
• Height Above Board: 0.049" (1.25mm)
• Mounting Feature: Normal, Standard - Top
• Contact Finish: Gold
• Contact Finish Thickness: 20µin (0.51µm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 670-2470-2

JAE | Connectors | Connector news release |Smallest-in-Class Size in the Industry, MicroSD Card Connect...
http://jae-connector.com/en/news-201004ST10-en.html
:: Applicable market
:: General specifications
:: Materials and Finishes
10. Card Insertion Force: 40N max.
1. No. of Contacts: 8pos. + 2 pos. (D-SW type)
2. Contact Resistance: 100 m ohm max.
3. Dielectric Withstanding Voltage: AC500 Vr.m.s. per minute
4. Operating Temperature: -25 Deg. C to +85 Deg. C
5. Storage Temperature: -10 Deg. C to +60 Deg. C
6. Rated Current: 0.5 A per terminal
7. Rated Voltage: 10V per terminal
8. Insulation Resistance: 1,000 M ohm min.
9. Durability: 10,000 times
Devices using microSD
Push-push structure, standard mounting type connector for the microSD
20% reduced volume compared to our existing push-push product (ST9 Series). (Reduced 14% in height and 6 % in
base area.)
Balanced EMI control through 4 hold-down grounding points.
Slim design with 1.25mm height, 13.2mm width, 14.85mm depth. (Depth including card: 16.75mm)
Supplied in embossed tape for automatic mounting. Compatible with second reflow (Note 3).
Halogen free, for environmentally friendliness.
Available with card insertion detection structure (D-SW), normally open.
Available with lock.
Easy card insertion and removal with 1mm push stroke and 3.1mm card ejection length.
Card pop-out countermeasure to prevent loss of cards.
Signal Contacts
D-SW Contact
Cam Follower
Cover Frame
Component
Note 3) Second reflow: Undergo soldering process twice for mounting on both sides of board.
Eject Bar
Housing
Spring
Lock
Copyright(C) 2002-2010 Japan Aviation Electronics Industry, Ltd.
TM
cards such as mobile phones, smart phones, digital still cameras, etc.
Stainless steel / Terminal area: Au flash plating over Ni
Copper alloy / Contact: 0.5u min. Au plating over Ni
Synthetic resin / None, halogen-free material
Terminal area: Au flash plating over Ni
Conforms with signal contact
Synthetic resin / N one
Stainless steel / None
Stainless steel / None
Stainless steel / None
Material/ Finish
TM
card standardized by the SDA.
Page Top
Page 2 of 2
5/26/2010