ATV11HU41M2U SQUARE D, ATV11HU41M2U Datasheet - Page 3

• Manufacturer Part Number: ATV11HU41M2U
• Description: AC Motor Drive
• Manufacturer: SQUARE D

Specifications of ATV11HU41M2U

• No. Of Phases: Two
• Power Rating: 3hp
• Output Voltage Max: 230VAC
• Supply Voltage: 230VAC
• Output Current: 10.6A
• Supply Voltage Max: 230V
• Supply Voltage Range: 195.5VAC To 253VAC
• Frequency Range: 0 To 200Hz
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Specifications —
[1]
Environmental Specifications
Electromagnetic compatibility (EMC)
Conducted and radiated emissions
for drive controllers
CE markings/standards
Degree of protection
Vibration resistance
Shock resistance
Maximum relative humidity
Maximum ambient temperature
Maximum altitude
Electrical Characteristics
Input
Output frequency
Switching frequency
Speed range
Transient overtorque
Braking torque
Maximum transient current
Output voltage
Galvanic isolation
Protection
Analog input, AI1
Pulse with modification
Frequency (Hz)
Voltage (V)
Fault withstand (A)
1
ALTIVAR
®
11 AC Drive
IEC/EN 61000-4-2 Level 3
IEC/EN 61000-4-3 Level 3
IEC/EN 61000-4-4 Level 4
IEC/EN 61000-4-5 Level 3 (POWER ACCESS)
IEC/EN 61800-3, Environments 1 and 2
ATV11HU05••U: HU41••U and ATV11HU05••A; HU41••A: With additional EMC filter:
EN 55011, En 55022 Class B, 2 to 16 kHz for motor cable ≤ 5 m and Class A (Group 1),
2 to 16 kHz for motor cables ≤ 20 m
The drive controllers are CE marked on the basis of European directives relating to low voltage
(73/23/EEC and 93/68/EEC and EMC (89/336/EEC)
UL, CSA, NOM 117 and C-TICK
IP20
Per IEC/EN 60068-2-6
15 gn for 11 ms per IEC/EN60068-2-27
5: 93% non-condensing and without dripping, per IEC 60068-2-3
Storage -25: +65°C (-13 to +156°F)
Operating: -10: +50°C (14 to +122°F) by removing the protective cover from the top of the drive
controller. Up to +60°C, derate the current by 2.2% for every °C above 50°C
1000m (3280 ft.) without derating
Above 1000m, derate the current by 1% for each additional 100m (328 ft.)
• 1.5 mm peak from 3 to 13 Hz
• 1 gn from 13 to 200 Hz
0: 200 Hz
2: 16 kHz
1: 20
150% of rated motor torque
• 20% of nominal motor torque without dynamic breaking (typical value). Up to 150% with
optional dynamic braking resistor.
150% of rated drive controller current for 60 seconds
50 ±5% or 60 ±5%
ATV 11••U••F1•, 1-phase: 110 -15% 120 +10%
ATV 11•U••M2•, 1-phase: 200 -15% 240 +10%
ATV11•U••M3•, 3-phase: 200 -15% 230 +15%
≤ 1000 (prospective short-circuit current at connecting point) for 1-phase power supply
≤ 5000 (prospective short-circuit current at connecting point) for 3-phase power supply
Maximum 3-phase voltage equal to:
Galvanic isolation between power and control (inputs, outputs, power supplies)
Protected against short circuits and overloads:
1 programmable analog input
Max. sampling time: 20 ms, resolution 0.4%, linearity ±5%
• voltage 0 to 5 V or 0 to 10 V, impedance 40 k ohms
• current 0 to 20 mA or 4 to 20 mA (without added resistance), impedance 250 ohms
the supply network voltage for ATV11•U••M2•
twice the supply network voltage for ATV11•U••F1•
+5 V (0/_5%) for speed reference potentiometer (2.2 at 10 k ohms, max. 10 mA
+15 V (±15%) for control inputs, max. 100 mA
continued