DPM 1AS-BL
Unless otherwise noted, specifications apply at T =25°C, V
input mode.
LASCAR ELECTRONICS LTD.
MODULE HOUSE
WHITEPARISH
WILTSHIRE
UK
TEL: +44 (1794) 884567
FAX: +44 (1794) 884616
E-MAIL: sales@lascar.co.uk
PRODUCT DESCRIPTION
The DPM 1AS-BL features a 200mV d.c. measurement range with auto-zero and auto-polarity. Decimal points are user
selectable.
to its own power supply GND.
of the panel meter's housing allows the module to be
suit high and low volume applications. The DPM 1AS-BL is intended to replace the DPM 1, DPM 1S, DPM 1-BL and
DPM 1S-BL in many applications, usually requiring only minor circuit modifications.
FEATURES
TYPICAL APPLICATIONS
• Precision Instrumentation Systems
• Power Supply Monitoring
• Hand held instruments
• Panel-Mount Indication
• Low Power Voltage Measurement
ELECTRICAL SPECIFICATIONS
SAFETY
To comply with the Low Voltage Directive (LVD 93/68/EEC), input voltages to the module’s pins must not exceed
60Vdc. The user must ensure that the incorporation of the panel meter into the user’s equipment conforms to the
relevant sections of BS EN 61010 (Safety Requirements for Electrical Equipment for Measuring, Control and
Laboratory Use).
• 5.5
• 200mV d.c. Full Scale Reading
• 3.0 to 7.5V or 6.0 to 15.0V Operation
•
•
•
Specification
Accuracy (overall error) *
Linearity
Sample rate
Operating temperature range
Temperature stability
Meter supply voltage
Meter supply current
Backlight supply voltage
Backlight supply current @ 5V d.c.
Input leakage current (Vin = 0V)
* To ensure maximum accuracy, re-calibrate periodically.
** Operation of the meter beyond the maximum supply voltage rating may cause permanent damage to the meter.
*** An external series resistor is required above 5V, see Applications.
**** This specification linearly derates to 20mA @ 50°C.
Auto-zero and Auto-polarity
Programmable Decimal Points
LED Backlighting
mm (0.22") Digit Height
SP5 2SJ
The DPM 1AS-BL features a negative rail generator which enables the meter to measure a signal referenced
V+ to GND configuration
V+ to V-
V+ to GND configuration
V+ to V-
LED backlighting ensures excellent readability under low light conditions.
configuration
configuration
www.lascarelectronics.com
E-MAIL: us-sales@lascarelectronics.com
LASCAR ELECTRONICS INC.
3750 WEST 26th STREET
FAX: +1 (814) 838 8141
TEL: +1 (814) 835 0621
supply
=5Vd.c. (f
PA 16506
easily snapped into a panel. The module's
ERIE
USA
Min.
4.75
3.0
6.0
0
clock
=48kHz) and are tested with the module configured for single ended
ORDERING INFORMATION
Standard Meter
3½ Digit Backlit LCD Voltmeter Module
Typ.
250
350
175
0.1
2.5
5.0
9.0
5.0
15
1
Max.
15.0**
***
±1
7.5
30****
50
10
No: 695 - Page 1 of 4
UNIT NOS. 6-8, 19/F FUTURA PLAZA,
LASCAR ELECTRONICS (HK) LIMITED
low cost means it will
E-MAIL:purchasing@lascar.com.hk
% (±1 count)
111-113 HOW MING STREET,
samples/sec
KWUN TONG, KOWLOON,
ppm/°C
V d.c.
V d.c.
V d.c.
Stock Number
DPM 1AS-BL
count
Unit
mA
m
m
pA
°C
FAX: +852 2389 6535
TEL: +852 2389 6502
A
A
The design
HONG KONG
Page 2 of 4
Page 2 of 4