CPM1-CIF01 Omron, CPM1-CIF01 Datasheet - Page 18

• Manufacturer Part Number: CPM1-CIF01
• Description: ADAPTER, RS232
• Manufacturer: Omron

Specifications of CPM1-CIF01

• Accessory Type: Adapter
• Length: 90mm
• External Width: 30mm
• External Depth: 56mm
• Svhc: No SVHC (15-Dec-2010)
• No. Of Digital Inputs: 1
• No. Of Digital Outputs: 1
• For Use With: CPM1A Modules
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Summary of Programming Instructions
Differentiated instructions can sometimes be used for CPM1A
special instructions. Instructions marked with (@) in the mne-
monics can also be used as differentiated instructions. Here the
input rise time (shift from OFF to ON) is used to execute the
instruction in just one cycle.
To specify an instruction, press the NOT Key after the function
code.
Example: Specifying the @MOV (21) instruction
Sequence Input Instructions
Note: f: Instruction keys allocated to the Programming Con-
22
Programming Instructions
f
Code
LOAD
LOAD NOT
AND
AND NOT
OR
OR NOT
AND LOAD
OR LOAD
Instruction
Function Code Chart
Table
Differentiated Instructions
Sequence Instructions
sym-
bols
sole.
Allocated to instruction
keys on the Program-
ming Console. These
need not be specified
with function codes.
Special instructions
specified with function
codes.
LD
LD NOT
AND
AND NOT
OR
OR NOT
AND LD
OR LD
Mnemonic
FUN
Details
2
f
f
f
f
f
f
f
f
Code
1
Connects an NO condition to
the left bus bar.
Connects an NC condition to
the left bus bar.
Connects an NO condition in
series with the previous condi-
tion.
Connects an NC condition in
series with the previous condi-
tion.
Connects an NO condition in
parallel with the previous
condition.
Connects an NC condition in
parallel with the previous
condition.
Connects two instruction
blocks in series.
Connects two instruction
blocks in parallel.
NOT
---
specifying program-
WRITE
Key operations for
FUN
ming instructions
Function
Code
WRITE
Sequence Output Instructions
Note: f: Instruction keys allocated to the Programming Con-
Sequence Control Instructions
Note: f: Instruction keys allocated to the Programming Con-
OUTPUT
OUT NOT
SET
RESET
KEEP
DIFFER-
ENTIATE
UP
DIFFER-
ENTIATE
DOWN
NO
OPERA-
TION
END
INTER-
LOCK
INTER-
LOCK
CLEAR
JUMP
JUMP END
TIMER
COUNTER
RE-
VERSIBLE
COUNTER
HIGH-
SPEED
TIMER
Instruction
Instruction
Instruction
Timer/Counter Instructions
sole.
sole.
OUT
OUT NOT
SET
RSET
KEEP
DIFU
DIFD
NOP
END
IL
ILC
JMP
JME
TIM
CNT
CNTR
TIMH
Mnemonic
Mnemonic
Mnemonic
f
f
f
f
11
13
14
00
01
02
03
04
05
f
f
12
15
Code
Code
Code
Outputs the result of logic to a
bit.
Reverses and outputs the re-
sult of logic to a bit.
Force sets (ON) a bit.
Force resets (OFF) a bit.
Maintains the status of the
designated bit.
Turns ON a bit for one cycle
when the execution condition
goes from OFF to ON.
Turns ON a bit for one cycle
when the execution condition
goes from ON to OFF.
---
Required at the end of the pro-
gram.
If the execution condition for
IL(02) is OFF, all outputs are
turned OFF and all timer PVs
reset between IL(02) and the
next ILC(03).
ILC(03) indicates the end of an
interlock (beginning at IL(02)).
If the execution condition for
JMP(04) is ON, all instructions
between JMP(04) and
JME(05) are treated as
NOP(00).
JME(05) indicates the end of a
jump (beginning at JMP(04)).
An ON-delay (decrementing)
timer.
A decrementing counter.
Increases or decreases PV by
one.
A high-speed, ON-delay
(decrementing) timer.
Function
Function
Function