61F-GP-N8 AC24 Omron, 61F-GP-N8 AC24 Datasheet - Page 18

• Manufacturer Part Number: 61F-GP-N8 AC24
• Description: Sensors
• Manufacturer: Omron
• Series: 61Fr
• Type: Level Control - General Purposer

Specifications of 61F-GP-N8 AC24

• Applications: Supply and Drain Control
• Mounting Type: Socket Mount (8 pos)
• Voltage - Supply: 24VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 61F-GP-N8AC24; 61FGPN8AC24

61F-GP-Nj
Specifications
Note: 1. The relay in the 61F-GP-NH de-energizes when there is water present across the Electrodes, whereas the relay in the 61F-GP-
Controlling materials
and operating
conditions
Supply voltage
Operating voltage
range
Interelectrode
voltage
Interelectrode
current
Power consumption
Interelectrode
operate resistance
Interelectrode
release resistance
Response time
Cable length
(see note 2)
Control output
Ambient temperature
Ambient humidity
Insulation resistance
(see note 3)
Dielectric strength
(see note 3)
Life expectancy
Compact Plug-in Models (11-pin Type)
2. The length when using completely-insulated, 600-V, 3-conductor (0.75 mm
3. The insulation resistance and dielectric strength indicate values between power terminals and Electrode terminals, between power
4. Possible to use with 10 kΩ or less, however, this may cause reset failure.
Item
N8HY energizes when there is water present across the Electrodes.
shorter as the cable diameter or number of conductors becomes larger.
terminals and contact terminals, and between Electrode terminals and contact terminals.
For control of
ordinary purified
water or sew-
age water
24, 100, 110, 120, 200, 220, 230 or 240 VAC; 50/60 Hz
85% to 110% of rated voltage
8 VAC
Approx. 1 mA AC max.
Approx. 3.2 VA max.
0 to approx.
4 kΩ
Approx. 15 k to
∞ Ω
Operate:
Release:
1 km max.
1 A, 250 VAC (Inductive load: cosφ = 0.4)
3 A, 250 VAC (Resistive load)
Operating: --10°C to 55°C (--10°C to 70°C for high-temperature controller)
Operating: 45% to 85% RH
100 MΩ min. (at 500 VDC)
2000 VAC, 50/60 Hz for 1 min.
Electrical: 100,000 operations min.
Mechanical:5,000,000 operations min.
General-pur-
Controller
61F-GP-N
pose
80 ms max.
160 ms max.
For control of
ordinary purified
water or sewage
where operating
ambient temper-
ature is high.
0 to approx.
4 kΩ
Approx. 15 k to
∞ Ω
600 m max.
ture Controller
High-tempera-
61F-GP-NT
For control of
ordinary purified
water in cases
where the dis-
tance between
sewage pumps
and water tanks
or between re-
ceiver tanks and
supply tanks is
long or where
remote control
is required.
0 to approx.
1.3 kΩ (for
2 km)
0 to approx.
0.5 kΩ (for
4 km)
4 k to ∞ Ω (for
2 km)
0.5 k to ∞ Ω
(for 4 km)
2 km max.
4 km max.
2KM (for 2 km)
4KM (for 4 km)
Long-distance
Controllers
61F-GP-NL
61F-GP-NL
For control of
liquids with high
specific resis-
tance such as
distilled water
Approx.
0.12 mA AC
max.
Approx. 10 kΩ
to approx.
40 kΩ
(see note 4)
Approx. 100 k
to ∞ Ω
50 m max.
High-sensitiv-
ity Controller
(see note 1)
61F-GP-NH
2
) cabtire cables. Usable cable lengths will become
For control of
liquids with low
specific resis-
tance such as
salt water, sew-
age water, acid
chemicals, alka-
li chemicals
Approx. 1 mA AC max.
0 to approx.
1.3 kΩ
Approx. 4 k to
∞ Ω
1 km max.
Low-sensitiv-
ity Controller
61F-GP-ND
61F-GP-Nj
For control of
ordinary purified
water or sew-
age water used
in combination
with Two-wire
Electrode
Holder (incorpo-
rating a resistor
of 6.8 kΩ)
0 to
approx. 2 kΩ
Approx. 15 k to
∞ Ω
800 m max.
61F-GP-NR
Controller
Two-wire