PLH120P AIM-TTI INSTRUMENTS, PLH120P Datasheet - Page 4

• Manufacturer Part Number: PLH120P
• Description: PSU 120V 0.75A PROG
• Manufacturer: AIM-TTI INSTRUMENTS

Specifications of PLH120P

• Power Supply Output Type: Programmable
• No. Of Output Channels: 1
• Output Voltage: 120V
• Output Current: 750mA
• Power Rating: 90W
• Input Voltage: 115VAC / 230VAC
• Supply Voltage Typ: 115VAC / 230VAC
• Load: RoHS Compliant
• No. Of Outputs: 1
• Load Regulation: 0.01%
• Rohs Compliant: NA

Measurably better value











The PLH series has been developed from the New PL series and re-
tains all of its advanced features at output voltages of 120V or 250V.
Linear regulation offers the highest possible performance, and the
compact quarter-rack width design provides an impressive 90 watts
of power.
PLH-P series units have the same comprehensive set of interfaces as
the New PL-P.
PL303QMDP
Brief specifications for main outputs:
Line & load regulation: <0.01%. Output noise: < 0.4mV rms.
Meter accuracies: voltage - 0.1% ± 1digit, current - 0.3% ± 3 digits.
Sizes: singles - 105 x 130 x 290/315mm; dual - 210 x 130 x 290mm (WxHxD)
Brief specifications for main outputs:
Line & load regulation: <0.01%. Output noise: < 0.4mV rms.
Meter accuracies: voltage - 0.1% ± 1digit, current - 0.3% ± 3 digits.
Size: PLH - 105 x 130 x 290mm; PLH-P - 105 x 130 x 315mm
PL303QMD
PLH120-P
PLH250-P
PL155P
PL303P
PL601P
Linear regulation provides ultra-low noise
Highly compact (¼ rack 3U) with small bench footprint
True analog controls with advanced digital features
Settings can be locked at the touch of a button
4 digit voltage and current meters on each output
Low current range with 0.1mA resolution
Constant voltage or constant current operation
Independent, tracking or true parallel modes (PL303QMD)
Front and rear power and sense terminals (PL-P models)
Analog remote control (PL-P single output models)
RS-232, USB and LAN/LXI interfaces (PL-P model)s
PLH120
PLH250
Model
Model
PL155
PL303
PL601
For more complete information on any product, please visit our web site: www.tti-test.com
Outputs
Outputs
One
One
One
Two
One
One
One
Two
One
One
One
One
2 x (0 to 30V / 0 to 3A) 180W
2 x (0 to 30V / 0 to 3A) 180W
0 to 120V / 0 to 0.75A
0 to 250V / 0 to 0.36A
0 to 120V / 0 to 0.75A
0 to 250V / 0 to 0.36A
0 to 60V / 0 to 1.5A
0 to 60V / 0 to 1.5A
0 to 15V / 0 to 5A
0 to 30V / 0 to 3A
0 to 15V / 0 to 5A
0 to 30V / 0 to 3A
Voltage / Current
Voltage / Current
manual & bus programmable -
Power
Power
75W
90W
90W
75W
90W
90W
90W
90W
90W
90W
RS232
RS232
RS232
RS232
RS232
RS232
Interfaces
Interfaces
/USB/LAN
/USB/LAN
/USB/LAN
/USB/LAN
/USB/LAN
/USB/LAN
-
-
-
-
-
-
The New PL series is the latest power
supply series from TTi and represents
the successor to best-selling PL series.
This ultra-compact linear regulated
design retains the traditional analog
controls of the PL but adds important
digital features.
The New PL-P series offers a
comprehensive set of digital interfaces
including RS232, USB and LAN
(Ethernet) as standard, with GPIB
optional.
The LAN interface is compliant with
LXI-C. LXI (LAN eXtensions for
Instrumentation) is the next-generation,
modular architecture standard for
automated test systems, and is expected
to become the successor to GPIB in
many systems.
When working with any piece of equipment,
engineers tend to require a voltage source
variable over only a narrow range.
That’s where the V-Span function comes in.
It allows the user to redefine the end-stop
values of the voltage control to create a
specific voltage range.
For example - An engineer is working on a
circuit that will operate from four NiMh cells.
They use V-Span to set a Vmax of 5.8 volts
(to prevent over-voltage damage) and a
Vmin of 3.6 volts (to ensure that the circuit
doesn’t reset).
They now have a power supply which
provides high-resolution analog control over
the exact voltage range they need.
Laboratory Power Supplies 3.




The New PL series is the solution for users requiring
an advanced linear regulated precision bench
power supply that retains conventional analog
controls.
It’s ultra-compact design uses minimal space on the
bench or in the rack.
The New PL-P series offers the same manual
control features but adds full remote control using
analog, RS232, USB and LAN interfaces, the latter
conforming with LXI.
For more information concerning LXI visit:




New PL
PLH
High performance power supplies
Linear regulation, 75W to 180W
Manual or bus programmable
RS-232, USB, LAN or GPIB
High voltage versions of New PL
Manual or bus programmable
90W power at 120V or 250V
RS-232, USB, LAN or GPIB
The PLH series is available mid 2009
New Product
&
PLH-P series
www.
&
tti-test.com/go/lxi
PL-P series
Page 3