TEN 8-2410 TRACOPOWER, TEN 8-2410 Datasheet - Page 2

• Manufacturer Part Number: TEN 8-2410
• Description: DC/DC Converter
• Manufacturer: TRACOPOWER

Specifications of TEN 8-2410

• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 18VDC To 36VDC
• Power Rating: 8W
• Output Voltage: 3.3V
• Output Current: 2A
• Approval Bodies: CUL, EN, IEC, UL
• Supply Voltage: 24V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Input Specifications
Input current (no load)
Input current (full load)
Surge voltage (100 msec. max.)
Conducted noise (input)
ESD (electrostatic discharge)
Radiated immunity
Fast transient / Surge
Conducted immunity
Output Specifications
Voltage set accuracy
Regulation
Temperature coefficient
Ripple and noise (20 MHz Bandwidth)
Start up time (nominal Vin and constant resistive load)
Transient response (25% load step change)
Short circuit protection
Over load protection
Capacitive load
General Specifications
Temperature ranges
Derating
Humidity (non condensing)
12 Vin;
12 Vin;
24 Vin;
24 Vin;
48 Vin;
48 Vin;
– Input variation Vin min. to Vin max
– Load variation 0 – 100 %
– Load cross variation 25 % / 100 %
– Operating
– Case temperature
– Storage
12 Vout models / ±12 Vout models: 350 µF max. / ±160 µF max.
15 Vout models / ±15 Vout models: 240 µF max. / ±100 µF max.
5 Vout models / ±5 Vout models: 1600 µF max. / ±1000 µF max.
single output models: 1 % max.
other output models: 800 mA typ.
other output models: 400 mA typ.
other output models: 200 mA typ.
dual output models: 1 % max.
3.3 VDC models: 720 mA typ.
3.3 VDC models: 360 mA typ.
3.3 VDC models: 180 mA typ.
3.3 Vout models: 3300 µF max.
24 Vin models: 15 mA typ.
48 Vin models: 10 mA typ.
24 Vin models: 50 V max..
48 Vin models: 100 V max.
12 Vin models: 15 mA typ.
12 Vin models: 36 V max..
EN 55022 level A, FCC part 15, level A
For 12 Vin models with external input capacitor:
4.7 µF / 25 V 1210 MLCC
EN 61000-4-2, air ±8 kV, contact ±6 kV,
perf. criteria A
EN 61000-4-3, 10 V/m, perf. criteria A
EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±1 kV perf. criteria A
With external input capacitor e.g. Nippon
chemi-con KY 220 µF, 100 V, ESR 48 mOhm
EN 61000-4-6, 10 Vrms, perf. criteria A
±1 %
0.2 % max.
5 % max.
0.02 %/K
50 mVpk-pk typ.
700 ms max.
200 µs typ.
indefinite (automatic recovery)
150 % of Iout max. typ. foldback
–40°C to +85°C
+100°C max.
–55°C to +105°C
3.3 %/K above 70°C
95 % rel H max.
DC/DC Converters
TEN 8 Series
Page 2 of 3
8 Watt